Advertisement
Quick Links
Assembly Instructions
SBP-5
Watch the assembly video on line before assembling. It makes the
assembly much easier!
Components:
(SBP-5 Model) 5 sections of the circle, 4 having
white heat shrink on them and 1 being solid black.
(SBP-7 Model) 6 sections of the circle, 4 having
white heat shrink on them and 2 being solid black.
Base Assembly: 2 legs 3 arched cross pieces. All are
color coded for ease of assembly
6 nuts and bolts for bolting base together (1" x ¼")
1 black (tube) net with bungee
10-12 nuts & bolts for bolting the frame together.
(1"x ¼")
2 nuts and bolts for hub to frame assembly (5/16")
2 Washers (5/16")
1 sand bag for stability 5 lbs.
Assembly Instructions and User's Manual
Support line for Help Line: (865) 566-5425
Made in USA
& SBP-7
(Softball Pitching)
1
Advertisement
Summary of Contents for V-Flex SBP-5
- Page 1 Watch the assembly video on line before assembling. It makes the assembly much easier! Components: (SBP-5 Model) 5 sections of the circle, 4 having white heat shrink on them and 1 being solid black. (SBP-7 Model) 6 sections of the circle, 4 having white heat shrink on them and 2 being solid black.
- Page 2 Frame Assembly & Net Attachment Note: The SBP-5 and SBP-7 have the exact same base attachment but vary in the number of frame pieces. All parts are color coded for easy assembly.
- Page 3 To complete the circle apply downward pressure at this time. This will allow the two remaining pieces to be joined together. All parts should be bolted together at each coupler with the ¼” bolt and lock nuts before continuing. Tube Net Application Once the frame is complete and the center hub is attached, take the net and stretch it around the...
- Page 4 This allows you to raise and lower the pieces by 24 inches. Thank you for choosing V-Flex…...