Page 3
65130 F287 65130 F288 Service set 6003 9095 00 for Ecco 65S, -651S, -652S Consists of parts with ref. Nos. 2, 3 (Qty 1), 7, 10, 11, 19, 20, 22, 23, 25, 27, 29 and 31. Part numbers in bold type designate consumption parts.
Nozzle sets Consists of air cap, paint nozzle of stainless steel and paint needle of nylon. Nozzle set Air cap Paint nozzle Orifice dia Capacity Paint needle Part number Designation Designation Designation ml/min Designation 6003 9232 09 6509-01 6509 G 0.9 90–200 P007 6003 9235 11...
Operator’s Instructions Use Ecco genuine parts and accessories only for best function and safety. Before starting, read through all instructions carefully. HVLP High Volume Low Pressure. Air spray guns used for spraying of liquids under low pressure and low atomizing air pressure.
Page 6
Paint spraying Disassembly-Reassembly (see Fig. page 1) (see also Fig. 2) CAUTION VARNING Inhalation of paint, paint dust and solvent is not healthy. Make Before any intervention on the spray gun, shot off and relieved sure an approved spraybooth is used. The operator must use the compressed air supply and paint pressure to the gun.
Page 7
0.7 bar G 3/8 0.5-1 bar G 1/4 3 bar Fig. 1 65130 F230 Ecco 65S 2. Packing set 3. Packing screws 4. Fan with control 12. Paint needle 14. Back head 15. Spring 16. Wheel (Paint flow adjusting) 17. Trigger 21.
Troubleshooting Introduction Types of problems Always commence troubleshooting by checking the general condition Collection of information which makes it possible to identify the error of the spray gun. This can most easily be determined by test spraying, symptoms applicable to the spray gun in the event of malfunctioning which provides an opportunity for checking the spray pattern and ca- is a matter of vital importance.