Hi-Tech NEL 216 Users Quick Reference

HEIGHT CONFIGURATIONS
OPERATION
1- Open the lid and turn the unit ON. Set
the vacuum and seal levels (see below).
CONTROLS
Note: Turning the unit OFF at
any time during the cycle, then
turning it ON after 3 seconds:
this will RESET the unit.
Main switch
This is the main power switch of
the unit.
(a)
Standard support
height
2- Lay the pouches on the shims and align
their opening along the sealing cushion.
-15
ON
0
-30
OFF
USER'S QUICK REFERENCE
(b)
Low support height TILT position
Remove completely if Useful for packaging
nedded liquids
CUT OFF GAS
VACUUM
(OPTION) (OPTION)
(c)
3- Start the packaging cycle by closing the
lid (hold the lid closed until you feel a
suction).
VACUUM LEVELS
0 to 5
= period of 2 to 45 seconds
@ vacuum level of 10 to 90%
SEAL
5 to 11
= period of 45 to 90 seconds
@ vacuum levels of 100%
* Higher settings for porous materials such as meat)
SEAL LEVELS
SET to 5 for standard bags.
* Higher settings for thicker bags.
NEL MODELS