Advertisement
Quick Links
WATER SIDE HEAT EXCHANGER
CLEANING PROCEDURE
EVO 299–599
WARNING
These appliances MUST be installed by a properly licensed individual in
the City and State which the unit is being installed. All start up adjustments
and subsequent service work must be done by a similarly licensed
contractor or a factory trained service individual. Failure to comply could
result in loss of warranty and or severe personal injury, death and or
substantial property damage.
34000 Autry Street, Livonia, MI 48150 • 800.968.5530 • Fax 734.419.0209 • www.hamiltonengineering.com • LIT91195 REV 11/2020
EVO 299.2/.3–599.2/.3
300,000 BTU/hr
399,000 BTU/hr
630,000 BTU/hr
Page 1 of 3
Advertisement
Related Manuals for Hamilton Engineering EVO 299
Summary of Contents for Hamilton Engineering EVO 299
- Page 1 WATER SIDE HEAT EXCHANGER CLEANING PROCEDURE EVO 299–599 EVO 299.2/.3–599.2/.3 300,000 BTU/hr 399,000 BTU/hr 630,000 BTU/hr WARNING These appliances MUST be installed by a properly licensed individual in the City and State which the unit is being installed. All start up adjustments and subsequent service work must be done by a similarly licensed contractor or a factory trained service individual.
- Page 2 This would be done between 7. Turn on pump and circulate Hamilton Engineering Company, Inc. steps 2 & 3. solution (this is the reverse of Failure to follow the prescribed cleaning normal flow).
- Page 3 Appliance must be to select. once the solution is up to temp returned to Hamilton Engineering for Press the check mark to select start. exchanger replacement. Water quality Press down arrow to go to service.