Download Print this page

3Com 3C16684 User Manual

100base-fx distance extender module

Advertisement

Quick Links

Lifetime Limited Warranty
The duration of the warranty for the 100BASE-FX Distance Extender Module (3C16684) is lifetime.
Advance hardware exchange is available during the first year from your date of purchase in accordance with 3Com's standard terms and
conditions for such service. After the first year, the warranty reverts to 3Com's standard lifetime limited warranty.
To qualify for the lifetime limited warranty and the advance hardware exchange, you must submit the appropriate product warranty registration
card to 3Com, otherwise this product will be warranted for a period of one (1) year without advance hardware exchange.
HARDWARE: 3Com warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the
following lengths of time from the date of purchase from 3Com or its Authorized Reseller:
Network adapters:
Lifetime
Other hardware products:
One year unless otherwise specified above
Spare parts and spares kits:
90 days
If a product does not operate as warranted above during the applicable warranty period, 3Com shall, at its option and expense, repair the
defective product or part, deliver to Customer an equivalent product or part to replace the defective item, or refund to Customer the purchase
price paid for the defective product. All products that are replaced will become the property of 3Com. Replacement products may be new or
reconditioned. Any replaced or repaired product or part has a ninety (90) day warranty or the remainder of the initial warranty period, whichever
is longer.
3Com shall not be responsible for any software, firmware, information, or memory data of Customer contained in, stored on, or integrated with
any products returned to 3Com for repair, whether under warranty or not.
SOFTWARE: 3Com warrants that the software programs licensed from it will perform in substantial conformance to the program specifications
therefor for a period of ninety (90) days from the date of purchase from 3Com or its Authorized Reseller. 3Com warrants the media containing
software against failure during the warranty period. No updates are provided. 3Com's sole obligation with respect to this express warranty shall
be (at 3Com's discretion) to refund the purchase price paid by Customer for any defective software products, or to replace any defective media
with software which substantially conforms to 3Com's applicable published specifications. Customer assumes responsibility for the selection of the
appropriate applications program and associated reference materials. 3Com makes no warranty or representation that its software products will
work in combination with any hardware or applications software products provided by third parties, that the operation of the software products
will be uninterrupted or error free, or that all defects in the software products will be corrected. For any third party products listed in the 3Com
software product documentation or specifications as being compatible, 3Com will make reasonable efforts to provide compatibility, except where
the non-compatibility is caused by a "bug" or defect in the third party's product.
STANDARD WARRANTY SERVICE: Standard warranty service for hardware products may be obtained by delivering the defective product,
accompanied by a copy of the dated proof of purchase, to 3Com's Corporate Service Center or to an Authorized 3Com Service Center during the
applicable warranty period. Standard warranty service for software products may be obtained by telephoning 3Com's Corporate Service Center or
an Authorized 3Com Service Center, within the warranty period. Products returned to 3Com's Corporate Service Center must be pre-authorized
by 3Com with a Return Material Authorization (RMA) number marked on the outside of the package, and sent prepaid, insured, and packaged
appropriately for safe shipment. The repaired or replaced item will be shipped to Customer, at 3Com's expense, not later than thirty (30) days
after receipt of the defective product by 3Com.
WARRANTIES EXCLUSIVE: IF A 3COM PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER'S SOLE REMEDY FOR BREACH OF
THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT 3COM'S OPTION. TO THE FULL EXTENT
ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR
CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS,
OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. 3COM NEITHER ASSUMES NOR
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR
USE OF ITS PRODUCTS.
3COM SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE
PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR
TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY.
TO THE FULL EXTENT ALLOWED BY LAW 3COM ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY,
WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE
DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF
ITS PRODUCTS, EVEN IF 3COM OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS
LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT 3COM'S OPTION. THIS DISCLAIMER OF LIABILITY FOR
DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential
damages for certain products supplied to consumers or the limitation of liability for personal injury, so the above limitations and exclusions may be
limited in their application to you. This warranty gives you specific legal rights which may vary depending on local law.
GOVERNING LAW: This Limited Warranty shall be governed by the laws of the state of California.
3Com Corporation, 5400 Bayfront Plaza, Santa Clara, CA, 95052-8145, U.S.A. Tel: (408) 764-5000, 9/1/96
3Com, SuperStack, and Transcend are registered trademarks of 3Com Corporation.
Other brand and product names may be registered trademarks or trademarks of their respective holders.
© 1997 3Com Technologies
Part No. DUA1668-4AAA01
Published October 1997
D
ISTANCE
®
100BASE-FX Distance Extender Module
The 100BASE-FX Distance Extender Module
(3C16684) is designed for use with 3Com's
®
SuperStack
II Dual Speed Hub 500 12- and
24-port versions (3C16610 and 3C16611) units.
When installed in a Dual Speed Hub 500 unit, the
Module provides a single 100Mbps Fast Ethernet
fiber 802.1D bridged port supporting either full
(FD) or half (HD) duplex modes. You can use this
port to provide a high-speed long distance (up to
2Km using FD mode) connection to another
segment of your network infrastructure, or to a
local server or endstation.
The Module also enables you to overcome the Fast
Ethernet network design limitations by forming
chains of almost limitless numbers of hubs; each
fiber link being up to 2Km long.
Examples of network configurations and more
information about Fast Ethernet configuration
rules can be found in the hub's user guide.
When the Module is fitted in a managed Dual
Speed Hub 500 unit, it can provide traffic
statistics, link status and duplex mode. You may
also enable and disable the port.
Technical Specification
Forwarding Rate: 148,800 frames per second.
Forwarding Mode: fragment-free.
Operating temperature: 0–50°C (32–122°F).
Humidity: 0–95% non-condensing.
Power consumption: 5W maximum.
The Module is VLAN and LSA compatible. It filters
all frames smaller than 64 bytes in size. Frames
greater than 1522 bytes are forwarded, unless
there is traffic congestion, when they are
rejected. It forwards all other traffic, such as
normal traffic and multicast frames. No address
filtering is performed.
100BASE-FX
E
M
XTENDER
ODULE
U
G
SER
UIDE
Standards
Functional
ISO/IEC 8802-3
IEEE 802.1D
UL 1950
Safety
EN 60950
EN 60825-1
CSA 22.2 #950
Environmental
EN 60068
EMC
EN55022 Class B
FCC Part 15 Class A
ICES-003 Class A
EN50082-1
AS/NZS 3548 Class B
VCCI Class B
Electromagnetic Compatibility
FCC Statement:
This equipment has been tested with a Class A computing device
and has been found to comply with part 15 of FCC Rules. Operation
in a residential area may cause unacceptable interference to radio and
TV receptions requiring the operator to take whatever steps are
necessary to correct the interference.
CSA Statement:
This Class A digital apparatus meets all requirements of the Canadian
Interference-causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.
Handling the Module
CAUTION: The Module can easily be damaged
by electrostatic discharge.
To prevent damage, please observe the following:
Do not remove the Module from its packaging
until you are ready to install it into the hub.
Do not touch any of the pins, connections or
components on the Module.
Handle the Module only by its edges and front
panel.
Always wear an anti-static wristband connected
to a suitable earth point.
Always store or transport modules in appropriate
anti-static packaging.

Advertisement

loading

Summary of Contents for 3Com 3C16684

  • Page 1 For any third party products listed in the 3Com software product documentation or specifications as being compatible, 3Com will make reasonable efforts to provide compatibility, except where the non-compatibility is caused by a "bug"...
  • Page 2 Figure 1 100BASE-FX Distance Extender Module Wichtige Sicherheitsinformationen Important Safety Information WARNING: Installation and removal of the Module must be carried out by qualified personnel only. Before installing the Module into a hub, you must first disconnect the hub from the mains power supply. For full safety instructions, refer to the user guide that accompanies the hub.

This manual is also suitable for:

100base-fx distance extender