Advertisement
Quick Links
Growing squash and cucumbers on a trellis saves space, reduces disease problems and makes harvesting a breeze. Titan A-Frame
Trellis is made from polyethylene-coated steel that will last for years to come. The polyethylene is non-degradable and provides a
clean look while protecting the steel from the elements. The steel tubing provides strength and durability, yet is also lightweight and
easy to assemble.
Parts List
(2) Side Supports
(4) Staked Supports
(4) Support Connectors
(11) Trellis Supports
(20) Sure-Clips
(10) Net Clips
(1) Netting
NOTE: Assembly is easiest with 2 people.
Step 1. Identify and organize all parts on a clean, level surface.
Step 2. Form one side of the Trellis by attaching two Staked Supports to a Side Support using
the Support Connectors (Figure 1). Repeat to make the other side of the Trellis.
Step 3. Place a Trellis Support into the clips on top of the Side Supports, as shown in Figure 2.
Carefully stand the Trellis upright, spreading the legs apart to keep it stable.
Step 4. Place a Trellis Support against one side of the Trellis approximately 14"
from the bottom, as shown in Figure 4. Attach it to the Staked Supports using Sure-Clips
and the instructions below:
Tip: When attaching a Trellis Support using the Sure-Clips, remember that the Support should always
be on the outside of the Trellis and that the curved part of the Clips (Figure 5) will always be facing
towards the inside of the A-Frame Trellis.
Slide the looped end of a Sure-Clip over one end of the Support (Figure 4) and position it so the rounded
part of the Clip fits around the side of the Trellis. Bend the open ends of the Clip around the Cross
Support, securing the Sure-Clip into place. NOTE: This may take some extra strength as the Clips are
made to be tight. Repeat to attach the other side of the Support.
Step 5. Repeat Step 4 to attach another Trellis Support to the other
side of the Trellis.
#8595755
Titan A-Frame Trellis
Assembly
over please
Figure 3
Trellis Support
Figure 2
Trellis Support
Side Supports
Sure-Clip
Side Support
Figure 1
Side Support
Support
Connectors
Staked
Supports
Figure 4
The curved part of the Sure-Clip will
always be facing towards the inside of
the A-Frame Trellis.
1024V Rev 08/17
Advertisement
Related Manuals for Gardener's Titan A-Frame Trellis
Summary of Contents for Gardener's Titan A-Frame Trellis
- Page 1 Titan A-Frame Trellis Growing squash and cucumbers on a trellis saves space, reduces disease problems and makes harvesting a breeze. Titan A-Frame Trellis is made from polyethylene-coated steel that will last for years to come. The polyethylene is non-degradable and provides a clean look while protecting the steel from the elements.
- Page 2 Step 6. Follow the instructions from Step 4 to attach Figure 5 Figure 6 the remaining eight Trellis Supports to the front and back of the Trellis as shown in Figure 6. We Net Clip recommend having approximately 14" of space between Supports.