Introduction:
This special device makes managing buttons and zippers easier. Ideal for
persons with limited finger dexterity or who have use of only one hand.
Button Hook
Instructions for Buttoning:
Fig. A
1.
Slip the wire filament into the button hole. (Fig. A)
2.
Hook the button with the wire filament. Then raise and turn the button to pull it
through the button hole. If you need support on the shirt to keep it steady while
you button, hold the shirt tails with your free hand. (Fig. B)
3.
Pull the button through the button hole. Then slip the wire filament off the button.
(Fig. C)
Instructions for Unbuttoning:
Fig. A
1.
Slip the wire filament through the button hole and slip hook over the button. (Fig. A)
2.
Twist and pull the button until it slips out of the button hole. If you need support on
the shirt to keep it steady while you unbutton, hold the shirt tails with your free hand.
(Fig. B)
3.
Slip the wire filament off the button. (Fig. C)
© 2011 North Coast Medical, Inc.,
Gilroy, CA 95020, 800-821-9319
Button Hook/Zipper Pull
Fig. B
Fig. B
Fig. C
Fig. C
www.ncmedical.com
REV28616I_0611