Vantec MRK-235ST Installation Manual

Installation Guide
1
3 4 5
6
Description:
The ability to convert a 2.5" SSD/HDD to 3.5" HDD form factor is now so much easier with the introduction of
this latest addition to the Storage Accessories, the new 2.5" to 3.5" SATA SSD/HDD Converter, this Converter
transforms any 2.5" SSD or HDD into a 3.5" Standard Hard Drive form factor. Made with Aluminum and Steel
Alloy casing for heat dissipation, this versatile converter emulates the same Standard 3.5" HDD size, SATA
connection and pass thru design for the fastest 6Gbps speed possible for any 2.5" SSD/HDD place into the
converter. In addition the Patent NSS connector on the converter is design to support many cycles of hot swap
(50,000), thus keeping the hard drive safe and in a durable environment. This screw-less and tool-less designed
converter makes it easy to add and change drive on this 2.5" to 3.5" SATA SSD/HDD Converter.
Features:
• Support standard 2.5" SSD/HDD SATA drive
• Support 9.5mm and 12.5mm SSD/HDD
• Aluminum and Steel Alloy for good heat dissipation
• Patent NSS Connector for 50,000 cycles of hot swap
• Pass thru for the fastest SATA III speed (6Gbps)
• Screw-less and tool-less for easy swap of drive
• Support any speed the SATA drive (SATA I/II/III)
• Hot-Swappable ready, No Drivers Needed (NDN) for any OS
• Status LED for clear indication of power/activity
Specifications:
Model: MRK-235ST
Device Support: 2.5" SATA III/II/I SSD/HDD (9.5mm & 12.5mm)
Device Size: 3.5" SATA drive form factor
Internal Interface: Standard SATA
External Interface: Standard SATA
HDD Capacity: Any size
Material: Aluminum, Steel Alloy and ABS
Dimension: 141 x 101.6 x 25.5 mm
Weight: 150g
Package Contents:
• 2.5" to 3.5" SATA SSD/HDD Converter
• Mounting screws
• Quick installation Guide
Information in this document is subject to change without notice.
Printed in China
Printed on Recycled Paper. Reproduction of these materials in any manner whatsoever without written permission is strictly forbidden.
2
Product Overview
1. Door latch
2. Drive bay door
3. SATA power connector
4. SATA data connector
5. LED activity indicator
6. Drive mounting screws
MRK-235ST
Unlatch Door
Slide 2.5" SSD/HDD
into Drive Bay
Option #1
Insert Converter with 2.5" SSD/HDD drive into 3.5" Removable Drive Bay.
Option #2
Insert Converter with 2.5" SSD/HDD drive into System Chassis.
www.vantecusa.com
Copyright © 2016 Vantec Thermal Technologies. All Right Reserved. All Registered Trademarks Belong To Their Respective Companies.
Close Door
v1.01 Model: MRK-235ST/MRK-235ST-U3