OFM 130 Assembly Instructions

Models 130/130-AA3/130-AA3-DK /130-DK
Parts Listing
A
B
Chair Back
Chair Seat
1 Unit
1 Unit
C
D
Seat Mechanism
Casters
1 Unit
5 Units
E
F
Gas Lift
Telescopic Bellows
1 Unit
1 Unit
G
H
8x20mm Screws
Chair Base
4 Units
1 Unit
A
C
G
E
H
WEIGHT CAPACITY: 250 lbs.
Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Modern Mesh Ergonomic Task Chair
Assembly Instructions:
Tools Needed: Philips Head Screwdriver
STOP
Please read all instructions before assembly.
Step 1: Insert Casters (D) into Base (H).
If you are assembling a model with a DK Foot Ring please proceed
STOP
to subsequent pages for drafting kit assembly instructions.
Step 2: Insert Gas Lift (E) into Base (H).
Step 3: Cover Gas Lift (E) with 3 piece Telescopic Bellows (F).
B
Step 4: Place Chair Seat (B) upside down on a level,
Step 5: Insert four 30mm Screws (G) through holes in the
If you are assembling a model with optional Adjustable Arms please
STOP
proceed to subsequent pages for armrest assembly instructions.
Step 6: Carefully place Chair Seat (B) with attached Seat
Step 7: Slide Chair Back (A) with attached back support bar
F
Step 8: Hand tighten tension knob on Seat Mechanism (C)
Step 9: Carefully sit on chair to make sure the Gas Lift (E)
Step 10: Operate the Gas Lift lever on the Seat Mechanism (C),
Step 11: Readjust Chair Back (A) by loosening tension knob
D
12.12.13
non-abrasive surface and align pre-drilled holes in
Seat Mechanism (C), with holes in Chair Seat.
Seat Mechanism (C), and into the Chair Seat (B).
Tighten with screwdriver.
Mechanism (C) onto the Gas Lift (E), aligning the hole
in the Seat Mechanism with Gas Lift. Press down
on Chair Seat to secure onto Base (H).
into the slot on Seat Mechanism (C).
until the Chair Back (A) is properly secured.
is properly inserted into the Base (H).
to be sure unt is working properly.
on the Seat Mechanism (C) accordingly, for your
personal comfort.
161 Tradition Trail, Holly Springs, NC, 27540
800-520-7471 (voice)
919-303-6389 (voice)
support@ofminc.com
919-362-4765 (fax)
www.ofminc.com