Table of Contents
Advertisement
Quick Links
Use and Maintenance Manual
Manufacturer:
KLIMAWENT S.A.
81-571 Gdynia; ul. Chwaszczyńska 194
phone 58 629 64 80; 58 771 43 40
phone 58 629 64 80
e-mail: klimawent@klimawent.com.pl
www.klimawent.com.pl
Contents:
1.
Introductory Remarks ....................................................................................................... 2
2.
Application......................................................................................................................... 2
3.
Reservations of Producer ................................................................................................. 2
4.
Technical Data ................................................................................................................... 3
5.
Structure and Function ..................................................................................................... 4
6.
Assembly and Start-up ..................................................................................................... 5
7.
Operational Use ................................................................................................................. 6
8.
Troubleshooting Guide ..................................................................................................... 6
9.
Maintenance ...................................................................................................................... 7
10.
Occupational Health and Safety ....................................................................................... 7
11.
Transport and Storage ...................................................................................................... 7
12.
Terms of warranty ............................................................................................................. 8
13.
Sample of the Declaration of Conformity ........................................................................ 8
11.10.2019
1
Dust separator
dust separator EGO-2; EGO-4
EGO-2
EGO-4
800O80 EGO-2-W/M 11.10.2019/EN
800O81 EGO-2-N/M 11.10.2019/EN
800O82 EGO-4-W/M 11.10.2019/EN
800O83 EGO-4-N/M 11.10.2019/EN
Advertisement
Table of Contents
Summary of Contents for Klimawent EGO-2
-
Page 1: Table Of Contents
Operational Use ......................... 6 Troubleshooting Guide ..................... 6 Maintenance ........................7 Occupational Health and Safety ..................7 Transport and Storage ...................... 7 Terms of warranty ......................8 Sample of the Declaration of Conformity ................ 8 dust separator EGO-2; EGO-4 11.10.2019... -
Page 2: Introductory Remarks
1. Introductory Remarks The purpose of the present Use and Maintenance Manual is to supply User with directions wi- thin the range of application, installation, start-up and the use of the EGO-2; EGO-4 dust se- parator. Installing, start up and operational use are exclusively admissible after getting acquaint- ted with the contents of the Use and Maintenance Manual. -
Page 3: Technical Data
EGO-2W/M, EGO-4W/M – equipped with a bag filter Markings: EGO-2N/M, EGO-4N/M – equipped with a cartridge filter EGO-2N/M EGO-2W/M Fig. No.1 – EGO-2 – Dimensions EGO-4N/M EGO-4W/M Fig. No.2 – EGO-4 – Dimensions Table No.2 – EGO – Dimensions Type of the separator... -
Page 4: Structure And Function
Underneath the housing is located a waste bag, whereas above the housing is installed a bag filter of filtration fabric (EGO-2 W/M, EGO-4 W/M) or cartridge filter (EGO-2 N/M, EGO-4 N/M) Fig. No.1; Fig. No.2. -
Page 5: Assembly And Start-Up
EGO dust separator. EGO separator is energized through the power lead cord with a plug. The supply voltage is 3x400V/50Hz. The motor is started and stopped by means of a motor protective switch with short-circuit- and overload protection. dust separator EGO-2; EGO-4 11.10.2019... -
Page 6: Operational Use
1. The bag filter or waste bag 1. Replace the bag filter or the device is damaged the waste bag 2. The connection clamp/hoop 2. Tighten up the clamp or got released replace it for a new dust separator EGO-2; EGO-4 11.10.2019... -
Page 7: Maintenance
For the time of transport, protect the device from slide and overturn. Do not place one device on top of another. During the transport, loading/reloading protect the device from scratching, indents. Important is that the markings on the package surface would not get detached or obliterated. dust separator EGO-2; EGO-4 11.10.2019... -
Page 8: 12. Terms Of Warranty
Declaration of conformity EC No. …………….. Manufacturer (eventually the authorized representative / importer): name: KLIMAWENT S.A. address: 81-571 Gdynia, Chwaszczyńska 194 A person, authorized for issuing the technical documentation: Teodor Świrbutowicz, KLIMAWENT S.A. hereby declares that the appliance: name: dust separator type/model: EGO-2;...