Summary of Contents for UGO BASILE 40125
- Page 1 Assembling instructions Water Maze Cat. No. 40125 / 40155 / 40185 UGO BASILE S.R.L. sales@ugobasile.com / service@ugobasile.com www. .com ugobasile...
- Page 2 Page 1 assembling instructions (Rev. 1) Water Maze 40125 / 40155 / 40185 Cat. No. Assembling the Drain Valve You will find the drain valve in a yellow envelope attached to the pallet (see fig. 1). figure 1 You will note on the water-tank wall the threaded connector to which the drain valve will be attached;...
- Page 3 Page 2 assembling instructions (Rev. 1) Assemble the drain valve onto the flange (see figures 2 – 3 - 4): it is sufficient to screw the valve manually on the flange, no tool is required, as no particular torque is necessary. figure 3 During the valve assembly, the related flange should be blocked by a suit-...
-
Page 4: Other Connectors
Finally, 4 connectors of smaller diameter (see figure 6) are attached to the 4 quadrants of the water tank: these connectors are necessary for the opertion of Ugo Basile Atlantis System, a set of 1 or more (up to 4) platforms whose upward and downward movement can be controlled from outside the tank either manually or automatically. - Page 5 For any further information you may need concerning the assembly and/or use of our wa- ter tanks, please do not hesitate to contact our service department (or our local distribu- tor) either directly of via our support page http://www.ugobasile.com/support.html: UGO BASILE s.r.l. Via G. Di Vittorio 2 21036 GEMONIO – Varese, ITALY Phone : +39 0332 744574 service@ugobasile.com...