TABLE OF CONTENTS
1.
WHAT'S IN THE BOX & THE BASICS
MOUNTING YOUR SLIDERONE ON A TRIPOD
2.
3.
USING WITH FLEXTILT HEAD
4.
ADJUSTMENTS
5.
START USING
1. WHAT'S IN THE BOX & THE BASICS
1
5
3
4
6
2
1.
3/8"-16 Mounting screw
5.
LANC port
2.
Built-in LP-E6 battery bracket*
6.
Reducer bushing/adapter **
3.
Shutter trigger port
7.
Allen keys
3/8"-16 Mounting port
4.
*The battery bracket is located in different places in SliderONE v2
& SliderONE PRO v2.
**Reducer busing (6) is attached to the 3/8"-16 mounting port (4)
2. MOUNTING SLIDERONE ON A TRIPOD
You can use your SliderONE on a tripod
or flat surface.
Place the SliderONE on your tripod and
1.
rotate until it is tight.
3
SliderONE has 3/8"-16 screw on top for
2.
your tripod head. Place your tripod head
or your edelkrone FlexTILT Head on
SliderONE and rotate until it is tight.
Attach your camera to your tripod head.
3.
Now, you are ready to slide.
2
Reducer busing is attached to the
4.
3/8"-16 mounting port. If your tripod has
3/8"-16 mounting screw, you need to
7
dettach the 3/8"-16 reducer bushing by
turning it counter clockwise.
1
4
A detailed video explaining the mounting process can be found at:
http://edel.kr/so
3. USING WITH FLEXTILT HEAD
The FlexTILT Head is recommended
as a tripod head solution for the
SliderONE.
With the FlexTILT Head 2,
you can easily:
-Adjust the center of gravity,
-Pan/tilt, and
-Change the height of the camera.
A detailed video explaining how to use the FlexTILT Head with SliderONE
A detailed video explaining how to operate the SliderONE can be found from :
can be found at: http://edel.kr/so
manuals.edelkrone.com