Summary of Contents for Mad4One PUSH-N2
- Page 1 How to mount the pedals PUSH-N2 and MAD-PRO-015 PUSH-N2 This procedure is valid for both types of pedals, PUSH-N2 and MadPro- 015. But first we have to understand, which is the RIGHT pedal and which is the LEFT one. MadPro-015...
- Page 2 How to mount the pedals PUSH-N2 and MAD-PRO-015 PUSH-N2 Here is the difference between the left and right pedal of the PUSH-N2. The groove on the left pedal axis (red arrow) indicates which pedal should be mounted on the left crank.
- Page 3 How to mount the pedals Montare correttamente i PUSH-N2 and MAD-PRO-015 PEDALI PUSH-N2 e MAD-PRO 015...
- Page 4 How to mount the pedals PUSH-N2 and MAD-PRO-015 Important Pedals, that have not been tighten enough, can irreparably damage the cranks. Before every ride, please check if pedals and cranks have been tighten enough.
- Page 5 How to mount the pedals PUSH-N2 and MAD-PRO-015 The Assembly Instructions We refer also to section 2 of our Manual “Instructions” that You find in our page “Tipps & Tricks”: 2. Pedals The left pedal is marked with "L" and MUST be mounted on the left crank marked with "L".