These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. MAINTENANCE AND REPAIRS Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service.
The bake chamber is made of stainless steel. The oven door is double pane tempered glass and features a heavy-duty hinge mechanism. Thermostat range for PA0054 & PA0055 is 150°F to500°F, while for PA0098 is 150°F to 550°F. Timer range is 0 to 120 minutes.
Page 4
THIS APPLIANCE MUST BE GROUNDED AT THE TERMINAL PROVIDED. FAILURE TO GROUND THE APPLIANCE COULD RESULT IN ELECTROCUTION AND DEATH. INSTALLATION OF THE UNIT MUST BE DONE BY PERSONNEL QUALIFIED TO WORK WITH ELECTRICITY AND PLUMBING. IMPROPER INSTALLATION CAN CAUSE INJURY TO PERSONNEL AND/OR DAMAGE TO EQUIPMENT.
GENERAL INFORMATION This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. Before using your new equipment, read and understand all the instructions &...
LOCATION DO NOT install the Counter top Convection Oven directly on the Floor. DO NOT install oven closer than 1" on the control side, from another oven. DO NOT install oven closer than 12" on the control side, from a uncontrolled heat source (char broiler, open flame, griddle, etc.) DO NOT CONNECT TO DIRECT CURRENT (DC).
Adjust Temperature to desired setting and Fan, heat and indicator light comes on. move timer to manual position. Fan will reverse only on CRCC-100 model. Indicator lights shuts off. Oven has reached desired temperature. Load product into oven. See Hints & Suggestions - “Loading the Oven” Set Timer to desired cook time.
Page 8
CLEANING • Always start cleaning with a cold oven. • The stainless exterior can easily be cleaned using stainless steel cleaner. • Always follow the cleaner manufacturer’s instructions when using any cleaner. • Care should be taken to prevent caustic cleaning compounds from coming in contact with the fan wheel.