Advertisement
Quick Links
Certified Snowblower Cable Assembly
This covers the following models (Read completely before performing service):
• 100435
060-3732
• 100566
060-3740
• 100567
060-3742
• 100568
060-3744
SAFETY PRECAUTIONS
• To reduce the risk of injury, user must read and understand the operator's manual before using this
product.
• DO NOT make any adjustments to snowblower without first stopping the engine, removing the engine
key, and disconnecting the spark plug wire.
• Burns from hot parts — let the engine cool for 30 minutes before touching hot parts.
• Injury from moving parts — this machine may pick up and throw objects which can cause serious
personal injury. Keep bystanders at a safe distance.
• To reduce the possibility of fire or explosion, be careful when working around gasoline. Keep
cigarettes, sparks and flames away from all fuel-related parts.
• DO NOT run the engine with the belt guard removed.
2/20/19
Technical Bulletin
Number: 190219-140-50-1
Date: 02-19-19
22" Snowblower
24" Snowblower
27" Snowblower
30" Snowblower
1
Champion Power Equipment, Inc.
Advertisement
Related Manuals for Champion 100435
Summary of Contents for Champion 100435
- Page 1 • To reduce the possibility of fire or explosion, be careful when working around gasoline. Keep cigarettes, sparks and flames away from all fuel-related parts. • DO NOT run the engine with the belt guard removed. 2/20/19 Champion Power Equipment, Inc.
- Page 2 1. NOTICE: Cables are disconnected from the control handles and found near to the belt guard cover the front of the gas tank. 2. Remove bubble wrap and cable assembly ends will look as shown to the right. 2/20/19 Champion Power Equipment, Inc.
- Page 3 Unscrew part A and B of the wire. 4. Place the drive control connector into the right handle as shown. This will be the cable that comes from the right side of the unit. 2/20/19 Champion Power Equipment, Inc.
- Page 4 See ADJUSTING SELF-DRIVE CONTROL HANDLE CABLE in your manual for correct adjustments. 7. Repeat for the auger cable on the left side. 8. The cable will be located on the left side of the snowblower. 2/20/19 Champion Power Equipment, Inc.
- Page 5 If you have any questions regarding the previous procedure, please contact our technical department Monday-Friday from 8:30 AM-5:00 PM PST at 877-338-0999. Champion Power Equipment, Inc. 12039 Smith Ave. Santa Fe Springs, CA 90670 Phone: 1-877-338-0999 Email: tech@championpowerequipment.com...