Office Star Products 3121 SYNCHRO TILT MANAGERS CHAIR Operating Instructions

3121 SYNCHRO TILT MANAGERS CHAIR
3
2
WARRANTy
Office Star chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Year on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return
authorization. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 250 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
OPERATING INSTRUCTIONS
FEATURE
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
• SYNCHRO TILT
• TILT TENSION ADJUSTMENT
5
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
• ARM HEIGHT & WIDTH ADJUSTMENT
4
WARNING
1
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
3. Check that all bolts screws and knobs are tight every three
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
To raise seat remove pressure from seat and lift lever (1).
To lower seat height sit on chair and lift lever (1).
To recline backrest pull lever (2) out, to lock return backrest
to upright position and push lever (2) in.
For individual comfort, this chair has been equipped with
an adjustment that will allow the user to change the tension
of the tilting feature. Turn knob (4) clockwise to increase
tension and counter-clockwise to decrease or ease the
tension.
To adjust arm height, push button (5) in to allow the arms
to move up or down freely. Release the button (5) once
the desired height is reached. To adjust width loosen Arm
Width Adjustment Knob (3) under seat, slide arm to desired
position then tighten knob.
securely tightened.
months or as needed.
cover as head covering. It may cause suffocation.