Advertisement
Quick Links
Advertisement
Summary of Contents for Keiser KMS800
- Page 1 Operating Manual...
- Page 2 Technical Data KMS800 Model KMS800 KMD900 M 1 2 0 0 M X 1 8 0 0 D Power 1800 W 1900 W Frequency 50/60 Hz 1800w 50/60 Hz No-Load Speed 1st Gear 150 - 300 rpm 150 – 300 rpm...
- Page 3 Safety Precautions To be able to use the machine safely it is essential that you read the operating instructions Do not reach into the mixing container with your hands or insert any other objects into it and the safety instructions thoroughly and comply with all of them. The machine is to be while mixing is in progress.
-
Page 4: Assembly Operation
Proper use Operation Check that the power supply shown on the rating plate is the same as the mains power supply. The machine is designed for mixing liquid and powder-based building products such as paints, mortar, adhesives, plaster and similar substances. Use the right mixing tool for the Always hold the machine with both hands. -
Page 5: Warranty
Care and maintenance Warranty Before you carry out any operations on the machine, and especially when changing the The manufacturer provides a warranty within the framework of his terms and conditions of mixing tool, always pull out the power plug rst. delivery in accordance with the requirements of statutory/ country-speci c provisions. - Page 6 KMS800 Description Description 1 Right Handle 33 The rotor 2 Left Handle 34 M insulation gasket 3 Screw ST3.9X20 35 Bearing 608 Z 4 Clamp 36 Needle bearing HK0810 5 Screw ST3.5X16 37 The second active gear shaft 6 Capacitance 38 Hemicycle key 2.5X3.7X10...
- Page 7 Description Description KMD900 37 Safety ring ￠9 1 Right Handle 2 Left Handle 38 The reversing shaft 39 Safety ring ￠26 3 Screw ST3.9X20 4 Clamp 40 Reversing the tooth 5 Screw ST3.5X16 41 Bearing 6000 Z 6 Capacitance 42 Needle bearing HK0810 7 Round inductance 43 The second active gear shaft 8 The inductance...