Clas Ohlson 40-2024-1 Quick Start Manual

Winter Work Gloves
Art.no 40-2024-1, -2, -3
Model Workwear by CO
Please read the entire instruction manual before use
and then save it for future reference. We reserve
the right for any errors in text or images and
any necessary changes made to technical data.
In the event of technical problems or other queries,
please contact our Customer Services.
Safety
No protective product can offer complete
protection, always assess the risks and take into
account maximum exposure when choosing
a protective product. The levels of protection apply
to unused products and can be affected by use and
conditions of use, such as heat, wear, moisture etc.
Damaged or worn gloves will not provide the specified
level of protection and they must be disposed of,
not repaired. Gloves shall not be worn if there is
a risk of entanglement in moving parts of machines.
The insulating ability can be lost if non-waterproof
gloves become wet.
Protection against cold, EN 511: If the glove is
comprised of multiple material layers, the overall
performance is specified. Factors that can affect
the glove's protection against cold are the ambient
environment (temperature, humidity, moisture, wind),
individual circumstances (person, other clothing) and
what you are doing (activity level, type of work etc.).
More information can be found in EN 511:2006,
appendix B, while conducted studies can be found in
EN 342:2014, appendix B.
Protection against mechanical risks, EN 388:
The label inside the gloves specifies the levels
of performance achieved from standard tests
and applies to unused gloves. For details, see
the pictogram explanations. If the glove is comprised
of multiple material layers, the result need not always
reflect the outermost material. There are two test
methods for cutting resistance. For materials which
affect the test equipment (the sharpness of the blade),
TDM applies. In such cases, the Coup method only
provides an indication.
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Product description
Lined gloves made of textile materials, polyurethane
and membrane. For protection against mechanical
risks, cold and wet. These gloves have been tested
in accordance with European standards and comply
with the requirements of the Personal Protective
Equipment Regulation (EU) 2016/425.
EU declaration of conformity
The declaration can be found on our website:
https://www.clasohlson.com
1. Use the search field to find the concerned
product.
2. Click the product.
3. Select the 'Details' tab.
4. The EU declaration of conformity can be found in
the 'Documents' section.
Durability
The materials used in the gloves have no defined
limitations as regards best before dates. The gloves
are affected by how they are stored, used, cared
for, handled etc. Check and assess the gloves
before use. Dispose of them if there are signs of
damage/wear.
Size
Comply with the EN 420 standard as regards size,
fit, comfort and pliability. For optimum protection,
only gloves of a suitable size should be worn.
A glove which is too large or too small can affect
the protection offered.
Material/Allergens
These gloves contain no known allergens. If, however,
symptoms of hypersensitivity are experienced, use
of the gloves should be discontinued. For more
information, contact Clas Ohlson Customer Services.
Gloves shall not be worn if there is a risk of
entanglement in moving parts of machines. Damaged
or worn gloves will not provide the specified level of
protection. Contact Customer Services if you have
any questions.
Care and storage
• If the gloves have been tested for washability, the appropriate symbols will be found on the label. If no
symbols are found, testing has not been conducted and the gloves are not suitable for washing. Do not use
chemicals or sharp objects to clean them.
• Store the gloves in a dark, dry place (+10–30 °C). Avoid exposing them to direct sunlight.
Responsible disposal
The product should be disposed of in accordance with local regulations. If you are unsure how to proceed,
contact your local council.
Specifications
Sizes
41-2024-1 size 8, 41-2024-2 size 10, 41-2024-3 size 12
EN 388:2016
A
Protection Abrasion
level resistance
(Number
of cycles)
1 100
2 500
3 2000
A B C D E F
4 8000
5 N/A
EN 511:2006
A
Protection Convective cold, ITR
2
level (m K/W)
0 < 0.10
1 ≥ 0.10 ITR < 0.15
2 ≥ 0.15 ITR < 0.22
3 ≥ 0.22 ITR < 0.30
4 ≥ 0.30
A B C
Standards and type approval
EN 420:2003 + A1: 2009 Protective gloves – General requirements and test methods
EN 388:2016 Protective gloves against mechanical risks
EN 511:2006 Protective gloves against cold
Type approval conducted by Intertek ITS Testing Services (UK) Ltd, Centre Court Meridian Business Park
Leicester, Leicester LE19 WD, United Kingdom
B C D E
Cut Tear Puncture Cut resistance
resistance resistance resistance TDM
Coup (Newtons) (Newtons) (Newtons)
(Index)
1.2 10 20 Not relevant
for these
2.5 25 60
gloves
5.0 50 100
10.0 75 150
20.0 N/A N/A
B C
Contact cold, R Water penetration
2
(m K/W)
< 0.025 Not approved
≥ 0.025 R < 0.050 Approved
≥ 0.050 R < 0.100
≥ 0.100 R < 0.150
≥ 0.150
F
Impact
protection
Not
relevant
for these
gloves