This equipment has been designed only for the applications described in this manual, other kind of uses are not foreseen and so, LARZEP, S.A. will not be responsible in any case of the damages caused by an inadequate use.
LARZEP, S.A. Please note that if the equipment is disassembled or serviced by anyone other than an authorized service dealer or by LARZEP, S.A., this guarantee is rendered null and void.
Instruction Manual Hydraulic Pullers 4. START UP. All models Keep the spindle greased and cleaned. Check the safety hole of the axle, if it hasn’t the hole, use the shaft protector as supporting point. Hold jaws slightly by tightening clamps bolts. Place jaws in the lowest hole and centred respect the spindle.
Periodically (at least once to the year), replace the hydraulic oil of the tank by clean oil. The oil filling it’s made through the plug. Check the level with the dipstick placing the pump head down in vertical position. Use LARZEP AZ8901 oil.
Instruction Manual Hydraulic Pullers 6. DECLARATION OF CONFORMITY.
Page 7
Instruction Manual Hydraulic Pullers DRAWINGS, PARTS AND DIMENSIONS. Extender Puller FZ & FT Capacity (Tn) A max. mm A min. mm B max. mm FV & FX Jaw puller Capacity (Tn) A max. mm B max. mm Bearing cup puller Capacity (Tn) A max.