Download Print this page
Onset HOBO HOBOnet RXW Series Manual

Onset HOBO HOBOnet RXW Series Manual

Leaf wetness sensor

Advertisement

Quick Links

HOBOnet® Wireless Sensor Network
RXW Leaf Wetness Sensor (RXW-LWA-xxx) Manual
RXW Leaf Wetness
Sensor
Models:
• RXW-LWA-900 (US)
• RXW-LWA-868 (Europe)
• RXW-LWA-921 (Taiwan)
• RXW-LWA-922
(Australia/NZ)
Included Items:
• Mounting bracket
• U-bolt
• Tie wraps
23962-C
This sensor measures leaf wetness and is designed to work with the HOBOnet® (HOBO RX)
Wireless Sensor Network in which data is transmitted wirelessly from the sensor mote across
the network to the station and then uploaded to HOBOlink® web-based software. With
HOBOlink, you can monitor sensor readings, view graphs, set up alarms, download data, and
more.
Specifications
Sensor
Measurement Range
0 (dry) to 100% (wet)
Sensor Type
Capacitive grid
Interchangeability
±10%
Between Sensors (Over
the Range 10–90% Wet)
Repeatability
±5%; see Note 1
Resolution
0.59%
Stability (Drift)
< ±5% per year (in typical growth conditions)
Service Life
3 years in typical growth conditions
Wireless Mote
Operating Temperature
-25° to 60°C (-13° to 140°F) with rechargeable batteries
Range
-40 to 70°C (-40 to 158°F) with lithium batteries
Radio Power
12.6 mW (+11 dBm) non-adjustable
Transmission Range
Reliable connection to 457.2 m (1,500 ft) line of sight at 1.8 m (6 ft) high
Reliable connection to 609.6 m (2,000 ft) line of sight at 3 m (10 ft) high
Wireless Data Standard
IEEE 802.15.4
Radio Operating
RXW-LWA-900: 904–924 MHz
Frequencies
RXW-LWA-868: 866.5 MHz
RXW-LWA-921: 921 MHz
RXW-LWA-922: 916–924 MHz
Modulation Employed
OQPSK (Offset Quadrature Phase Shift Keying)
Data Rate
Up to 250 kbps, non-adjustable
Duty Cycle
<1%
Maximum Number of
50 motes per one RX Wireless Sensor Network
Motes
Battery Type/
Two AA 1.2 V rechargeable NiMH batteries powered by built-in solar
Power Source
panel or two AA 1.5 V lithium batteries for operating conditions of -40 to
70°C (-40 to 158°F)
Battery Life
With NiMH batteries: Typical 3–5 years when operated in the
temperature range -20° to 40°C (-4°F to 104°F) and positioned toward the
sun (see Deployment and Mounting), operation outside this range will
reduce the battery service life
With lithium batteries: 1 year, typical use
Memory
16 MB
Dimensions
Sensor grid: 4.7 x 5.1 cm (1.8 in x 2.0 inches)
Sensor housing: 12.2 x 1.8 cm (4.8 in x 0.7 inches)
Mounting bracket: 20 x 3 x 0.5 cm (8 x 1.3 x 0.2 inches)
Cable length: 2 m (6.56 ft)
Mote: 16.2 x 8.59 x 4.14 cm (6.38 x 3.38 x 1.63 inches)
Weight
Sensor and cable: 127 g (4.5 oz); with bracket: 290 g (10.2 oz)
Mote: 223 g (7.87 oz)
Materials
Sensor: PVC housing, epoxy potting compound, nylon grommet, FR-4
circuit board, PVC cable jacket
Bracket: PVC mounting bracket, UV-stable nylon cable ties, zinc
dichromate plated steel U-bolts
Mote: PCPBT, silicone rubber seal

Advertisement

loading

Summary of Contents for Onset HOBO HOBOnet RXW Series

  • Page 1 HOBOnet® Wireless Sensor Network RXW Leaf Wetness Sensor (RXW-LWA-xxx) Manual This sensor measures leaf wetness and is designed to work with the HOBOnet® (HOBO RX) Wireless Sensor Network in which data is transmitted wirelessly from the sensor mote across the network to the station and then uploaded to HOBOlink® web-based software. With HOBOlink, you can monitor sensor readings, view graphs, set up alarms, download data, and more.
  • Page 2 The system level repeatability will be particularly affected when placed in an electric field of 3 V/m or greater in the 150 KHz to 1000 MHz range. RFI mitigation practices and physical deployment changes may reduce the system susceptibility. If deployments are planned in high RFI energy environments, Onset recommends on-site testing to determine system level repeatability.
  • Page 3 HOBOnet Wireless Sensor Network for details). This indicates a problem with the sensor itself (the mote is operational). Check the sensor and make any adjustments to it as needed. Contact Onset Technical Support if the problem persists. Adding the Mote to the HOBOnet Wireless...
  • Page 4 RXW Leaf Wetness Sensor (RXW-LWA-xxx) Manual 7. Press the Search button (the magnifying glass) on the • Make sure the mote is mounted a minimum of 1.8 m (6 ft) station to stop searching for motes. from the ground or vegetation to help maximize distance and signal strength.
  • Page 5: Sensor Operation

    6. The mote appears as a new storage device in the Do not coat the HOBO leaf wetness smart sensor. Onset’s computer’s file storage manager. Copy the downloaded sensor is preconditioned and factory calibrated. Although it is firmware file to the new storage device (the mote).
  • Page 6 RXW Leaf Wetness Sensor (RXW-LWA-xxx) Manual last through the night and cloudy periods. Make sure the mote 3. Push in the side tab of the solar panel cable connector and is placed in a location that will receive several hours of sunlight pull the connector out of the cable port.
  • Page 7 ISM radio wave radiated devices. © 2019–2020 Onset Computer Corporation. All rights reserved. Onset, HOBO, HOBOlink, and HOBOnet are registered trademarks of Onset Computer Corporation. Mac is a registered trademark of Apple Inc. All other 1-800-LOGGERS (564-4377) • 508-759-9500 trademarks are the property of their respective companies.

This manual is also suitable for:

Hobo hobonet rxw-lwa-900Hobo hobonet rxw-lwa-868Hobo hobonet rxw-lwa-921Hobo hobonet rxw-lwa-922