CyberPower GP400U4A User Manual

8-Outlet Surge Protector
(4 AC & 4 USB ports)
GP400U4A
GP400U4AWH
2
3
4
USER'S MANUAL
Copyright © 2017 Cyber Power Systems, Inc. All rights reserved.
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower
GP400U4A/GP400U4AWH Surge Protector. The
information contained in this brochure explains
the features and operation of the
GP400U4A/GP400U4AWH. Please take a few
moments to read this manual.
FEATURES
1. Surge Protected Indicator
Illuminated when the surge protection feature
is working properly.
2. Four Standard Outlets
3. Pivoting Outlets
Pivoting outlets for ease of use and
convenience.
4. USB Charging Ports*
Connect and charge up to four (4) USB
devices using the surge protected USB
powering ports.
*USB outlets cannot be used as a USB hub. This
1
device does not transfer data.
SPECIFICATIONS
2 • Model Number: GP400U4A/GP400U4AWH
• Outlets: 8 Standard Outlets
• Surge Protection: 500 Joules
• Electrical Rating: 125V/15A/1875W
3
• USB Charger Rating: 5V/4.2A total
• UL Clamping Voltage: UL 1449 3rd/800 V (L-N)
4
• Maximum Peak Current: 15,000A
• 1 AC Line Protected: H-N: 15,000A (The
maximum surge possible on household Wiring
is 6,000 volts)
• Response Time: Less than 1 nanosecond
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK -
Use only in dry locations and only indoors. DO
NOT plug into another relocatable power tap.
DO NOT "daisy chain" surge protectors. DO NOT
use with any aquarium equipment. DO NOT use
if properly grounded outlets are not available.
DO NOT install this device if there is not at least
10 meters (30 feet) or more of wire between the
electrical outlet and electrical service panel.
This device features an internal protection that
will disconnect the surge protective component
but will maintain power to the load – now
unprotected. if this situation is undesirable for
the application, follow the manufacturer's
instructions for replacing the device.
TROUBLESHOOTING
If the Protected indicator does not light, the
surge protector's AC line is no longer protected
from surge. Replace the surge protector. The
surge protector may have received a power
surge or spike beyond its specified limits that
overloaded the protection circuitry and
rendered it inactive. The surge protector has
protected your connected equipment but it will
not protect against future surges and spikes.
TECHNICAL SUPPROT
Please contact our Tech Support department
with installation, troubleshooting, or general
product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday-Friday,
7:00am-6:00pm CST