HighSecLabs FH10N-4 Quick Installation Manual

Quick Installation Guide
HSL's USB eLock Solution
ELOCK OVERVIEW
Open USB ports expose computers, servers and corporate networks to numerous security threats. HSL's eLock offers a
comprehensive security solution for USB lockdown and control.
Objectives
• This guide includes instructions for installing HSL's FH10N-4, FC10N-4, UE10N-3 USB eLock device family.
• HSL's HID filter (FH10N-4) allows secure, unidirectional connection of USB keyboard and mouse. The eLock USB HID
Filter blocks all USB traffic except standard keyboard and mouse.
• The Configurable Filter version (FC10N-4) allows secure connection of two administrator-approved USB devices
based on VID/PID characteristics. By default the configurable filter will allow the use of USB authentication device.
• The USB eLock Plug (UE10N-3) - A mechanical USB port cup that physically locks individual USB ports.
For further assistance please refer to HSL website: http://www.highseclabs.com
Installation
• Connect the eLock devices to the PC based on the type of USB devices you would like to use.
• Note: Once installed it is impossible to remove the device from the USB port!
• Whenever protecting a PC, It is highly recommended to use at least one configurable filter and one HID filter.
• Block all other open ports with the USB eLock plugs.
• Note: Configurable filter configuration will allow the administrator to create a white list and black list rules, allowing
and preventing specific USB devices. This configuration is not covered by the manual.
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only.
| QUICK INSTALLATION GUIDE
FH10N-4/FC10N-4 , UE10N-3
HDC20403 Rev.1