Download Print this page

Ballard Designs Brittan Floor Lamp Quick Start Manual

Advertisement

Quick Links

PRODUCT NAME: Brittan Floor Lamp
ITEM NUMBER: LL344
ASSEMBLED DIMENSIONS: 63"H x 27"W
IMPORTANT SAFETY INSTRUCTIONS:
-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-For your safety, please read instructions carefully and completely before beginning assembly
or installation.
-Product must be installed according to applicable code(s) by a person familiar with its construction
and operation.
-This Lamp rated up to 40 Watt MAX Type A INCANDESCENT Bulb (Included or NOT Included).
WARNING:
-Deviation from assembly instructions may cause risk of fire or electric shock.
-To reduce risk of personal injury, always turn off fixture and allow bulbs to cool prior to
replacement.
-Do not touch or look directly at illuminated bulbs.
-Keep flammable material away from illuminated bulbs.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA
Page 1 of 3

Advertisement

loading

Summary of Contents for Ballard Designs Brittan Floor Lamp

  • Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Brittan Floor Lamp ITEM NUMBER: LL344 ASSEMBLED DIMENSIONS: 63”H x 27”W IMPORTANT SAFETY INSTRUCTIONS: -This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
  • Page 2 Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level surface. NOTE: To avoid accidentally discarding small parts or hardware, retain all carton contents until after assembly and installation are complete. Recommended Location for Use: Dry Indoor Environment Assembly Time: 25 Minutes INCLUDED: NOT INCLUDED:...
  • Page 3 NOTE: Unplug lamp prior to installation or removal. Turning off switch is not sufficient. STEP 1: ASSEMBLE LAMP BODY Carefully pull cord through Lamp Body (A) while Turn components bringing components together. CLOCKWISE Thread and turn clockwise until tightened. to tighten. NOTE: Permit cord to turn as components are tightened.

This manual is also suitable for:

Ll344