Vantec MRK-MST25 Installation Manual

Installation Guide
Installing MRK-MST250 If you are using shorter (27mm) or longer (70mm) mSATA card, please use the instructions on page 2 to adjust the card mount.
1.
Verify the package contents.
Installing UGT-MST100 If you are using shorter (27mm) or longer (70mm) mSATA card, please use the instructions on page 2 to adjust the card mount.
1.
Verify the package contents.
Information in this document is subject to change without notice.
Reproduction of these materials in any manner whatsoever without written permission is strictly forbidden.
Printed in China
Printed on Recycled Paper.
1.
2. 3.
Attach mSATA Device by inserting the mSATA
2.
card and securing the two screws to hold the
mSATA card in place.
1.
2. 3.
Attach mSATA Device by inserting the mSATA
2.
card and securing the two screws to hold the
mSATA card in place.
3.
Replace cover and secure with 4 screws.
The device is ready to be integrated into
3.
your system.
The device is ready to be integrated into
4.
your system.
Model: UGT-MST100/MRK-MST250
Copyright © 2014 Vantec Thermal Technologies. All Right Reserved. | All Registered Trademarks Belong To Their Respective Companies.