norix ATN-RR01K Assembly Instructions

www.norix.com ● TEL 800 234-4900
Assembly Notes:
Norix is not responsible for any damage due to improper installation. If your shipment does not match the parts list, please contact Norix Customer Service at 800-234-4900.
Norix reserves the right to modify design specifications at any time without an obligation to owners of previously sold products.
___________________________________________________________________________________________________________________________________________________________________________________________________
ITEM PART
QTY
NO. NUMBER
1 1 002-013
2 1 026-006
3 1 029-021
4 1 029-162
5 1 029-139
6 1 002-017
7 1 002-019
Installation
NOTE: The Restraint Rings can be located in any position on the
bed, however, recommended locations are shown in (Fig.1).
1. Apply thread lock to the internal threads on the Barrel Nut.
Assemble the parts as shown in (Fig. 2) for locations
2.
designated as B, attaching the Barrel Nut to the hardware or
anchor coming from the bottom of the bed. Tighten the
hardware securely. When positioning the Restraint Block on
the opposite side of the bed, be sure to align the pin holes
directly across the bed (see Fig. 1). This will ensure that the
restraint straps are perpendicular to the bed.
A
A
Head
A
A
Rev. B - 10/01/18
091-953
Removable Restraint Rings
Assembly Instructions
PARTS LIST
DESCRIPTION
Attenda, Restraint Ring Block
Washer, Flat 11/32 ID X 3/4 OD X 0.050, 18-8 SST
Nut, Barrel 5/16"-18 X 0.75"L, BH, Pin in Torx® T45, SST
Key, Removable Restraint Ring, Push-Lock Pin, Attenda
Ring, Attenda, Restraint, Solid, Removable
Attenda, Restraint Ring Push-Lock Pin, SS, Removable
Attenda, Restraint Ring Spacer, For Push-Lock Pin,
Stainless Steel, Removable
B A B B
B A B B
Fig. 1
Model Number
ATN-RR01K
ATN-RR06K
3
Align Pin holes
on opposite sides
of bed.
2
1
A
Foot
A
"A" Non-Restraint Positions
"B" Restraint Positions
Tools Needed
Low RPM Variable Speed Drill
Torx Bit T45
Fig. 2
Page 1 of 2