Advertisement
Quick Links
HMEHSKL/PL - SERIES
ASSEMBLY INSTRUCTIONS FOR
HMEHSKL/PL SWING HANDLE
escutcheon
plate
Step 1
ratchet
gear
A
Detail A
lock rod
Step 3
Phillips
TOOL BOX
Screw Driver
ratchet
gear
INSTRUCTION
A) Remove factory installed escutcheon plate (see Step 1).
B) Remove bottom lockrod by first removing nuts from lockrod
guides (see Step 2), then rotating the lockrod 45 degrees upwards
and dis-engaging lockrod from the ratchet gear
(see Step 3).
C ) Remove ratchet gear by rotating 45 degrees upwards,
dis-engage from the top lockrod then rotate 180 degrees (see Step
4), then re-install ratchet gear with bottom lockrod as shown (see
Step 5) and re-install nuts for lockrod guides.
7/16" (thin wall) Socket
Wrench
PAGE 1 OF 2
lock rod
guide
lock rod
Step 2
180 degree
rotation
ratchet
gear
Step 4
BUL86338
REV. B
HAMMOND
MANUFACTURING
www.hammondmfg.com
TM
Advertisement
Summary of Contents for Hammond Manufacturing HMEHSKL Series
- Page 1 BUL86338 HMEHSKL/PL - SERIES REV. B ASSEMBLY INSTRUCTIONS FOR HMEHSKL/PL SWING HANDLE escutcheon plate lock rod ratchet guide gear lock rod Step 2 Step 1 ratchet 180 degree gear rotation ratchet Detail A gear Step 4 INSTRUCTION A) Remove factory installed escutcheon plate (see Step 1). B) Remove bottom lockrod by first removing nuts from lockrod guides (see Step 2), then rotating the lockrod 45 degrees upwards and dis-engaging lockrod from the ratchet gear...
- Page 2 BUL86338 HMEHSKL/PL - SERIES ASSEMBLY INSTRUCTIONS FOR HMEHSKL/PL SWING HANDLE lock rod ratchet gear fully extend Step 6 bottom lock rod swing direction Completed Assembly INSTRUCTION CONTINUED D ) Before installing swing handle fully extend ratchet gear (see Step 5). E) Install swing handle as shown (see Step 6).