TAKATA DRIFT II Installation And Operating Instructions Manual

INSTALLATION and OPERATING
INSTRUCTIONS
TAKATA Static Harness Belts
For detailed information see
www.takataracing.com
Risk of serious injury or death!
Do not allow cargo or a folding rear seat to interfere with or
misdirect the harness belt tail straps.
This harness restraint is manufactured and approved in accordance to the
European Standard ECE-R 16.04 and/or FMVSS 209. This TAKATA asm harness
belt is only suitable for adults on front outboard seating positions.
Risk of severe injuries or death.
TAKATA harness belts will function properly only when installed in
vehicles equipped with seats having a headrest or backrests with
seatbelt openings in an integrated headrest. Otherwise the
shoulder belts will slide off occupant's shoulders during an accident.
Never modify factory seats to create new slots. The seat structure
may be impaired or sharp edges of the seat frame may damage the
racing harness webbing.
right right
Edition 06/2019
Part No.: EA 12.1
right wrong wrong
1
PACKAGE CONTENTS
DRIFT II [bolt-on]
DRIFT III [snap-on]
INSTALLATION
1 General Instructions
Only install DRIFT if rear seat occupation is not intended at any time. The
crossing shoulder straps restrict the rear seat capacity because the tail straps
cannot be released.
Risk of severe injuries or death. On 2-door vehicles the folding front
seat backrests will be restricted in their range of motion.
Evacuation or rescue of rear seat passenger can be restricted or
even impossible after an accident. Do not transport rear seat
passengers in 2-door vehicles while harness belt is installed.
Definitions:
tail strap
shoulder belts
shoulder belt tilt lock
adjusters
adjustment strap ends
buckle
buckle tongue
lap belt
bolt-on brackets
Definitions:
basic 3-bar adjuster
shoulder / tail straps
shoulder belts
shoulder belt tilt lock
adjusters
adjustment strap ends
buckle
buckle tongue
lap belt
snap-on brackets
2