Table of Contents
Advertisement
Quick Links
ATTACH YOUR RECEIPT HERE
Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-527-1292, 8:30 a.m. - 5 p.m., CST, Monday - Friday.
OUTDOOR LED WALL SCONCE
1
ITEM #0700617
MODEL #ODWLED-3CBZ
Español p. 9
3104664
Advertisement
Table of Contents
Summary of Contents for Litex ODWLED-3CBZ
- Page 1 ITEM #0700617 OUTDOOR LED WALL SCONCE MODEL #ODWLED-3CBZ Español p. 9 ATTACH YOUR RECEIPT HERE Purchase Date 3104664 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-527-1292, 8:30 a.m. - 5 p.m., CST, Monday - Friday.
-
Page 2: Package Contents
PACKAGE CONTENTS PART DESCRIPTION QUANTITY Fixture Mounting Strap (preassembled to mounting strap (B)) HARDWARE CONTENTS (shown actual size) Wire Connector Qty. 3 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product. - Page 3 SAFETY INFORMATION • DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying wire or the white neutral house wire. Connection of the bare or green fixture ground wire to the black or white house wires may cause metal parts of the fixture to carry electrical currents.
- Page 4 SAFETY INFORMATION CAUTION • TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing the fuse (or switching the circuit breaker off). • If you are not sure the lighting system has a grounding means, DO NOT attempt to install this fixture.
- Page 5 ASSEMBLY INSTRUCTIONS Remove existing fixture and disconnect all electrical wiring. Unwrap BARE wire from BLACK and WHITE wires on back side of fixture (A). Remove nut (C) from threaded nipple on mounting strap (B). Save nut (C) for later use. Threaded Nipple Attach mounting strap (B) to outlet box (not...
- Page 6 ASSEMBLY INSTRUCTIONS Prepare wire by stripping 3/4 in. of insulation from BLACK WHITE wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA).
- Page 7 ASSEMBLY INSTRUCTIONS Push wire connectors (AA) gently back into outlet box. Carefully push excess wiring into outlet box. Note: Make sure the LED cable is properly connected inside the lamp. Secure fixture (A) to mounting strap (B) with nut (C) that was previously removed (Step 3, Page NOTE: Before tightening nut (C) completely, use level (not included) to check fixture (A) -- adjust if necessary.
-
Page 8: Care And Maintenance
Litex Industries will, at its option, repair, replace or refund the purchase price to the consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. This...