Summary of Contents for K 5600 LIGHTING JOKER-BUG 200
Page 1
Important Safety Instructions Caution High Voltage! Before replacing the lamp, discsonnect lamp head from the ballast! Caution High Heat! Lamp and Beaker may be hot ! Allow the lamp to cool down sufficiently before replacing. Caution High Heat! The housing and ballast can reach high temperatures. Do not cover ventilation slots.
Page 2
Operation Check to be sure the ballast is switched off. Insert the connector of the lamp head (male) into the ballast output (female). Make sure the barndoors are not closed, danger of overheating! Press down the red button to turn on. Bulb Maintenance and Replacement Caution High Voltage! Before replacing the bulb, disconnect lamp head from the ballast! Remove the BEAMER (27) housing by loosening the Head Knob (6).