Uni-Trend UT300A User Manual

Model UT300 : USERS MANUAL
Introduction
The Model UT300A and UT300B Infrared Thermometer (hereafter, the "Thermometer") can determine the surface temperature by measuring the amount of infrared energy
radiated by the target's surface. They have different distance to spot (D:S) figure and different temperature range, details see the contents.
The Thermometers are non-contact infrared thermometer with low consumption design so that they can be used for a longer time, which can solve the frequently changing
battery and low battery issues during measurement. Intelligent design can make measurement easier and quicker. The Thermometer can intelligently select battery or USB
power source.
Contacting Uni-Trend
To contact Uni-Trend. call (852) 2950 9168 or visit Uni-Trend web site at www.uni-trend.com
Safety Information
A warning identifies conditions and actions that pose hazards to the user. To avoid electrical shock or personal injury, follow these guidelines:
Do not point laser directly at eye or indirectly off reflective surfaces.
Before using the Thermometer inspect the case. Do not use the Thermometer if it appears damaged. Look for cracks or missing plastic.
Replace the battery as soon as the battery indicator
Do not use the Thermometer if it operates abnormally. Protection may be impaired. When in doubt, have the Thermometer serviced.
Do not operate the Thermometer around explosive gas, vapor, or dust.
To avoid a burn hazard, remember that highly reflective objects will often result in lower than actual temperature measurements.
Do not use in a manner not specified by this manual or the protection supplied by the equipment may be impaired.
Figure 1. Symbols and Safety Markings
AVOID EXPOSURE – LASER RADIATTION IS EMITTED FROM THIS APERTURE
CAUTION
LASER RADIATION – DO NOT STARE INTO BEAM
OUTPUT
WAVELENGTH
LASER PRODUCT
COMPLIES WITH
To avoid damaging the thermometer or the equipment under test protect them from the following:
EMF (electro-magnetic fields) from arc welders, induction heaters, etc.
Static electricity.
Thermal shock (caused by large or abrupt ambient temperature changes – all 30 minutes from the Thermometer to stabilize before use).
Do not leave the Thermometer on or near objects of high temperature.
Features
The Thermometer includes:
Single-spot Laser Sighting
White colour Backlit Display
Current Temperature Plus MIN and MAX Temperature Displays/
Degree Celsius and Fahrenheit Temperature Selectable
Battery power monitoring
Low Battery Display
Display
MAX/MIN
How the Thermometer Works
Infrared thermometers measure the surface temperature of an opaque object. The Thermometer's optics sense infrared energy, which is collected and focused onto a detector.
The Thermometer's electronics then translate the information into a displayed temperature reading which appears on the display. The laser is used for aiming purposes only.
Operating the Thermometer
The Thermometer turns on when you press the trigger. The Thermometer turns off when no activity is detected for 8 seconds.
To measure temperature, aim the Thermometer at the target, pull and hold the trigger. Release the trigger to hold a temperature reading.
Be sure to consider distance-to-spot size ratio and filed of view. The laser is used for aiming only.
appears.
Laser "On" Symbol
SCAN or HOLD
Temperature values for the MAX and MIN
Battery indication
Display backlit
/ Symbol (Celsius/Fahrenheit)
Warning
Caution
1