Download Print this page

panthera 367 30 33 Instructions For Assembly

Brake, onehand right

Advertisement

Quick Links

We have developed a new single hand brake available in three width alternatives.
These three brake alternatives fit all our adult chairs, S2, S2 Short (if you don´t have a
shorter seat depth than 35cm) and U2. (Also fits our old standard chair no longer in
production).
Description
Brake onehand, new 30-33 right
Brake onehand, new 36-39 right
Brake onehand, new 42-45 right
The brake has to be prepared before being assembled onto the chair. It should be
adjusted according to the model of chair it will be attached to. Since each brake fits
two different widths of chair, this should also be adjusted before assembly.
How to prepare your single hand brake:
Start by checking the width of the chair on which the brake will be assembled.
1.
Adjust the correct width on the brake. On the middle rod there are two holes for
2.
adjusting the width of the brake. See figure 1. Loosen the nut and adjust to the desired
width. On the brake 30-33, the inner hole is for width 30. On brake 36-39 the inner hole
is for width 36, and so on.
panthera
Instructions for assembly
Brake, onehand right
Art.no
367 30 33
367 36 39
367 42 45
Adjust the brake width here.
Figure 1
Please turn over!
panthera
Panthera Production AB
Gunnebogatan 26, 163 53 Spånga, Sweden
Tel: +46 (8) 761 50 40 Fax: +46 (8) 621 08 10
panthera@panthera.se www.panthera.se
Page 1/4
Suitable for
Chair widths 30 and 33
Chair widths 36 and 39
Chair widths 42 and 45

Advertisement

loading

Summary of Contents for panthera 367 30 33

  • Page 1 Description Art.no Suitable for Chair widths 30 and 33 Brake onehand, new 30-33 right 367 30 33 Chair widths 36 and 39 Brake onehand, new 36-39 right 367 36 39 Chair widths 42 and 45 Brake onehand, new 42-45 right 367 42 45 The brake has to be prepared before being assembled onto the chair.
  • Page 2 ‘S2’ on both sides. (See the final page for assembly of the brakes on the chair). Brake arm, left Brake arm, right Figure 2 Please turn over! panthera Panthera Production AB Gunnebogatan 26, 163 53 Spånga, Sweden Tel: +46 (8) 761 50 40 Fax: +46 (8) 621 08 10 panthera@panthera.se www.panthera.se...
  • Page 3 (See the final page for assembly of the brakes on your chair). Brake arm, left Brake arm, right Figure 3 Please turn over! panthera Panthera Production AB Gunnebogatan 26, 163 53 Spånga, Sweden Tel: +46 (8) 761 50 40 Fax: +46 (8) 621 08 10 panthera@panthera.se www.panthera.se...
  • Page 4 9. You then tighten the screws securely. Loosen this nut on both sides (to separate the clamps). Figure 4 panthera Panthera Production AB Gunnebogatan 26, 163 53 Spånga, Sweden Tel: +46 (8) 761 50 40 Fax: +46 (8) 621 08 10 panthera@panthera.se www.panthera.se...

This manual is also suitable for:

367 36 39367 42 45