Summary of Contents for Charles Austen Enviro ET150
Page 1
SERVICE INSTRUCTIONS *ET150 - ET200 (Same procedure for alarm equivalent models) STEP 1 STEP 2 STEP 3 To start, unplug the pump from the mains. Unscrew the chamber cover at one end of the Unclip the diaphragm face to expose the Unscrew and remove the cover from the air pump.
Page 2
SERVICE INSTRUCTIONS *ET150 - ET200 (Same procedure for alarm equivalent models) STEP 10 STEP 11 STEP 12 Remove the diaphragm frame and peel off the Replace the worn diaphragm with the new one Remove the worn magnet and replace with the worn diaphragm.
Page 3
The wear and tear parts are outside the two year warranty but are covered by a year’s warranty providing they have been used correctly and not subjected to back pressure or water damage. Please contact Charles Austen Pumps on +44 (0)1932 355277 to purchase a service kit or for further help with servicing your pump.