Advertisement
Quick Links
THANK YOU
Thank you for purchasing the DUCT-COOL. Please read these instructions
thoroughly before installing / assembling this product.
PRODUCT FEATURES
- Removes air from enclosed areas with minimal noise
- Inline mixed flow duct fan is quieter and more efficient than centrifugal fans
- Operates only when needed, minimizing noise and dust
I
n s t r u c t i o n
c d d l
s e r i e s
S
h e e t
M id d le A tlan tic Products
I-00248
Rev C
Advertisement
Related Manuals for Middle Atlantic Products Cool Series
Summary of Contents for Middle Atlantic Products Cool Series
- Page 1 n s t r u c t i o n h e e t c d d l s e r i e s THANK YOU Thank you for purchasing the DUCT-COOL. Please read these instructions thoroughly before installing / assembling this product. PRODUCT FEATURES - Removes air from enclosed areas with minimal noise - Inline mixed flow duct fan is quieter and more efficient than centrifugal fans...
-
Page 2: Specifications
READ AND SAVE THESE INSTRUCTIONS/CONSERVER CES INSTRUCTIONS WARNING/DANGER HAZARDOUS VOLTAGE: The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 3 PARTS INTAKE ASSEMBLY PART MIXED FLOW ASSEMBLY PART (FAN UNIT) FAN UNIT MOUNTING PLATE PART FLEXIBLE DUCT (25 FEET) PART FLEXIBLE DUCT CLAMPS PART & 10-32 x 1/2 PHILLIPS HEAD SCREW PART CABLE TIE MOUNT PART (One Extra) #10 x 5/8 WOOD SCREW PART PART 10-32 LOCKNUT...
- Page 4 INTAKE ASSEMBLY INSTALLATION 1) Select mounting location. Choose an area free of obstructions (joists, wiring, etc.). NOTE: Intake Assembly mounts to material up to a thickness of 1-5/16". 2) Use provided Template to mark installation location. NOTE: Hole size is 7-1/8". 3) Cut hole using desired method (hand-saw, power-saw, etc.).
- Page 5 FAN UNIT INSTALLATION 1) Install Fan Unit (B) to Mounting Plate (C) using provided hardware (F & H). Use a Phillips Head Driver and 3/8" Wrench (mount in four places). (FIGURE A) NOTE: Mount flange up. FIGURE A NOTE: Fan Unit can mount on Mounting Plate in two directions, adjustable slots allow for two inch shift either way off center position.
-
Page 6: Temperature Probe Installation
TEMPERATURE PROBE INSTALLATION If using a THERM-A (See pg 8) disregard this page and refer to the instructions included with the THERM-A. 1) Determine what location the probe will be placed in the equipment room. Mount at the highest possible location. NOTE: It is recommended that the Temperature Probe is placed away from the Intake Assembly to properly gauge temperature. - Page 7 FLEXIBLE DUCT INSTALLATION 1) Lay Ductwork out between Intake Assembly and Fan Unit. NOTE: Fully extend Flexible Duct (D) minimizing the number of bends. Minimizing the number of bends maximizes air flow. 2) Pull back outer insulation on both ends. 3) Attach Flexible Duct to Louvered Intake with provided Clamp (E).
- Page 8 WARRANTY Middle Atlantic Products, Inc. (the "Company") warrants the DUCT-COOL to be free from defects in material or workmanship under normal use and conditions for (3) years from date of shipment by the Company. The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after inspection thereof at the Company's factory.