Eikon ES Series User Manual

ES500 USER GUIDE ES500 USER GUIDE
The ES500 dual channel power supply is our most innovative ES series power supply to date. With features like omnidirectional display, dual machine ports, Bluetooth capability, a
magnetic base and two USB charging ports, the ES500 power supply was designed to adapt to the way you work, anywhere you work.
ES500 QUICK START GUIDE
Choosing to jump right in? Download the Quick Start Guide. [insert QSG]
POWERING UP YOUR ES500
The ES500 does not have an ON or OFF switch. Plug it in and it's ready to go.
Sleep Mode
There's no need to power down at the end of a session. The ES500 is equipped with a Sleep Mode that will kick in after 20 minutes of inactivity.
The Jumpstart button will pulse when the ES500 is in Sleep Mode.​
NOTE: Bluetooth will automatically turn on, when the ES500 comes out of Sleep Mode.
360 OLED DIGITAL DISPLAY
The ES500 power supply includes an adjustable 360 degree digital display and voltage readout. The adjustable screen makes it possible to route your cords in any direction, and then
set the screen orientation.
The white OLED display provides a bright, crisp readout in any lighting condition, even when the ES500 is covered or bagged.
What information is displayed on screen
The ES500 displays the following three readouts when running a tattoo machine:
The current voltage.
The preset number (if one is selected).
The channel/port currently active when in Dual Channel Mode.
Adjusting display orientation
Choose your screen orientation:
1. PRESS and HOLD the button for three seconds.
2. PRESS to go into the Rotate Screen menu.
3. PRESS the ARROW that represents the direction you want the display to read.
VOLTAGE
The ES500 has a voltage range of 2.5V to 17V and six presets per channel. Voltage can be adjusted in 0.1V and 1.0V increments.
How to adjust voltage
PRESS or to adjust in 0.1 volt increments.
PRESS and HOLD or to adjust in full 1.0 volt increments.
POWER MACHINES
OVERVIEW TECH SPECS HOW TO
NEEDLES TUBES STORE
BUY NOW
PRICING