Download Print this page
MDT SCN-LOG Series Operating Instructions

MDT SCN-LOG Series Operating Instructions

Logic module

Advertisement

Quick Links

Technische Daten Logikmodul SCN-LOG -
Technische Daten
Technical Data
Spezifikation KNX Schnittstelle
Specification KNX interface
Verfügbare KNX Datenbanken
Available application software
Max. Kabelquerschnitt
Permitted wire gauge
KNX Busklemme
KNX busconnection terminal
Versorgungsspannung
Power Supply
Leistungsaufnahme KNX Bus typ.
Power consumption KNX Bus typ.
Temperaturbereich
Operation temperature range
Schutzart
Enclosure
Abmessungen REG (Teilungseinheiten)
Dimensions MDRC (Space Units)
MDT technologies GmbH
51766 Engelskirchen
Tel.: + 49 - 2263 - 880
Fax: + 49 - 2263 - 4588
Stand: 0419
Technical Data Logic Module SCN-LOG
SCN-LOG1.02
TP-256 mit Long Frame Unterstützung für ETS5
TP-256 with long frame support for ETS5
ETS 4/5
0,8mm Ø, solid core
KNX Bus
< 0,3W
-10 bis + 50°C
IP 20
2TE
Papiermühle 1
knx@mdt.de
www.mdt.de
Betriebsanleitung Logikmodul SCN-LOG
nur für autorisiertes Elektrofachpersonal
Operating Instructions Logic Module SCN-LOG
for authorised electricans
Allgemeine Sicherheitshinweise -
Important safety notes
Lebensgefahr durch elektrischen Strom -
Das Gerät darf nur von Elektrofachkräften montiert und angeschlossen werden. Beachten sie die länderspezifischen
Vorschriften sowie die gültigen KNX-Richtlinien. Die Geräte sind für den Betrieb in der EU zugelassen und tragen das CE
Zeichen. Die Verwendung in den USA und Kanada ist nicht gestattet.
Installation and commissioning of the device only be carried out by authorised electricans. The relevant standards,
directives, regulations and instructions must be observed. The devices are approved for use in the EU and have the CE
mark. Use in USA and Canada is prohibited.
Anschlußklemmen, Bedien- und Anzeigeelemente Logikmodul SCN-LOG
Terminals, Operating and Display Logic Module SCN-LOG
SCN-LOG.02
2
3
4
1
1 - Busanschlußklemme
3 - Rote Programmier LED
- KNX busconnection terminal
- Red programming LED
2 - Programmiertaster
4 - LED Anzeigen
- Programming key
- LED indicators
Technische Änderungen und Irrtümer vorbehalten,
Abbildungen können abweichen.
Danger High Voltage

Advertisement

loading

Summary of Contents for MDT SCN-LOG Series

  • Page 1 - KNX busconnection terminal - Red programming LED 2 - Programmiertaster 4 - LED Anzeigen - Programming key - LED indicators MDT technologies GmbH 51766 Engelskirchen Papiermühle 1 Technische Änderungen und Irrtümer vorbehalten, • • Tel.: + 49 - 2263 - 880 Fax: + 49 - 2263 - 4588 knx@mdt.de...
  • Page 2 Die Montage muss in trockenen Innenräumen erfolgen. The MDT Logic Module is used for fast and easy compilation of logical functions to control building automation systems. All the functions are parametrized directly in the ETS without additionally software tools. There are 24 independent function blocks with arbitrary functions available.

This manual is also suitable for:

Scn-log.02Scn-log1.02