Whirlpool GR563LXS Dimensions And Installation Information

®
PRODUCT MODEL NUMBERS
GR563LXS RF262LXS
GR673LXS RF263LXT
GR773LXS RF264LXS
RF110AXS RF265LXT
RF111PXS RF272LXT
RF114PXS RF362LXS
RF212PXS RF362LXT
RF214LXT RF367LXS
RF260BXS RF462LXS
RF261PXS
Electrical: This range is manufactured with the
neutral terminal connected to the cabinet. Use a
3-wire, UL listed, 40- or 50-amp power supply
cord (pigtail). If local codes do not permit ground
through the neutral, use a 4-wire power supply
cord rated at 250 volts, 40 or 50 amps and
investigated for use with ranges. A time-delay
fuse or circuit breaker is recommended. The
model/serial rating plate is located on the oven
frame behind the storage drawer panel.
CABINET OPENING DIMENSIONS
E
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
30" Freestanding Electric Range
OVERALL DIMENSIONS
A
E
C
B
D
F
A
E
A. 27 " (68.9 cm) depth with handle
B. 46 " (119.1 cm) overall height
C. 36" (91.4 cm) cooktop height
D. 29 " (75.9 cm) width
E. 24 " (63 cm) depth
A. 13" (33 cm) max. upper cabinet depth
B. 30" (76.2 cm) min. opening width
C. For minimum clearance to top of cooktop, see NOTE*.
D. 30" (76.2 cm) min. opening width
E. Outlet - 8" (20.3 cm) to 22" (55.9 cm) from either cabinet,
5 " (14.0 cm) max. from floor
F. " (2.2 cm) min. required between cutout and cabinet door or hinge
*NOTE: 24" (61 cm) minimum when bottom of wood or metal
cabinet is protected by not less than
retardant millboard covered with not less than No. 28 MSG
sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the
cooking platform and the bottom of an unprotected wood or
metal cabinet.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
B
C
D
" (0.64 cm) flame
Ref. W10141166
08-31-07