Advertisement
Quick Links
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
Phone: (
| Fax: (
888) 486-6163
216) 481-4519
Email: asginfo@asg-jergens.com | Web: www.asg-jergens.com
TTA Torque Arm Balancer Assembly
Work Instructions
1. Remove the hook.
2. Loosen the balancer spring to minimum force, acting on the
lever.
3. Loosen the cable holder.
PAY ATTENTION TO WIRE REBOUND!
44110-3898
Advertisement
Summary of Contents for Jergens ASG 80001
- Page 1 1. Remove the hook. 2. Loosen the balancer spring to minimum force, acting on the lever. 3. Loosen the cable holder. PAY ATTENTION TO WIRE REBOUND! ASG, Division of Jergens, Inc. S. Waterloo Road | Cleveland, OH 15700 44110-3898 Phone: (...
- Page 2 4. Extend the balancer wire as long as the arm length. 5. Fix the cable to allow safe handling 6. Remove the screw from the arm holder interface. ASG, Division of Jergens, Inc. S. Waterloo Road | Cleveland, OH 15700...
- Page 3 8. This is how the wire eye should be inside the arm. 9. Re-insert the holder interface screw and fix it. The screw should pass through the wire eye. ASG, Division of Jergens, Inc. S. Waterloo Road | Cleveland, OH 15700...
- Page 4 TTA Torque Arm Balancer Assembly Work Instructions 10. Mount the balancer bracket. 11. Mount the balancer and bracket into the arm bracket. 12. Loosen the cable holder ASG, Division of Jergens, Inc. S. Waterloo Road | Cleveland, OH 15700 44110-3898 Phone: (...
- Page 5 These work instructions can be used with the following part numbers: 80001, 80002, 80003, 80004, 80005, 80006, 80007 80008, 80009, 80010, 80011, 80012, 80013, 80014, 80015, 80016, 80017, 80018 ASG, Division of Jergens, Inc. S. Waterloo Road | Cleveland, OH...