Advertisement
Quick Links
ALUMINIUM TOWER ASSEMBLY & DISMANTLE INSTRUCTIONS
MANUFACTURER:
SCAFFOLD MODEL:
DESIGN REGISTRATION No.:
TOWER WIDTH
0.7m (hallway)
1.2m (standard)
LIGHT DUTY SCAFFOLD
• Safe working load 225kg per working level.
GENERAL GUIDELINES
• Mobile towers are intended for use on a hard, flat surface (maximum slope 5º). Keep away
from slab edges.
• Any tower erected where a person or object could fall 4m or more must be erected by a
ticketed scaffolder.
• All platforms above 2m (including ladder landings) must be fitted with guardrails and
toeboards all around.
• Avoid power lines (minimum clearance 4-8m...consult local electricity authority).
• Additional precautions should be taken to ensure stability of the tower in windy or
gusty conditions.
• Do not attach containment sheeting or banners to freestanding towers.
• Do not exceed limitations on max height, number of platforms or platform loadings.
(see above)
• Keep working platforms and landings clear of material and debris.
• Ensure all spring clips are engaged and braces positively connected.
• To dismantle, reverse erection procedure.
Oldfields
Pro Series
Q21984
MAX PLATFORM HEIGHT
END FRAME ONLY
WITH OUTRIGGERS
1.4m
3.6m
• Maximum number of working levels = 6 (six).
2.4M TRUSS BASE
6.5m
n/a
7.5m
7.2m
3.0M TRUSS BASE
n/a
9.0m
Advertisement
Summary of Contents for Oldfields Pro Series
- Page 1 ALUMINIUM TOWER ASSEMBLY & DISMANTLE INSTRUCTIONS MANUFACTURER: Oldfields SCAFFOLD MODEL: Pro Series DESIGN REGISTRATION No.: Q21984 MAX PLATFORM HEIGHT TOWER WIDTH END FRAME ONLY WITH OUTRIGGERS 2.4M TRUSS BASE 3.0M TRUSS BASE 0.7m (hallway) 1.4m 6.5m 1.2m (standard) 3.6m 7.5m 7.2m...
- Page 2 ALUMINIUM TOWER ASSEMBLY & DISMANTLE INSTRUCTIONS CONTINUED WARNING - NEVER CLIMB OR RELY ON ANY UN-BRACED FRAME 1) Place screwjacks or castors in the base of the frame on both sides. Engage spring clips and ensure frame leg collars are correctly seated on recessed nut and castor brakes are applied.