Advertisement
Quick Links
© Apollo Fire Detectors Limited 2010
Apollo Fire Detectors Limited, 36 Brookside Road, Havant, Hants, PO9 1JR, UK
Tel +44 (0)23 9249 2412 Fax +44 (0)23 9249 2754
Email: techsales@apollo-fi re.co.uk Website: www.apollo-fi re.co.uk
4
39214-587/Issue 1
Conventional Indoor Manual Call Point
General
The Conventional Indoor Manual Call Point is available in two versions:
Part Number
55100-001
55100-002
Conventional Indoor Manual Call Point
The Conventional Indoor Manual Call Point is supplied with a backbox for surface mounting.
The call point is 'Type A' and is suitable for indoor use only. For fl ush mounting, a standard
electrical outlet box with a minimum depth of 25mm is required.
Installation – General
The installation must conform to BS5839: Part 1 (or applicable local codes).
Installation
1.
Fit the backbox (Fig 1) to the wall.
2.
Run the cables into the backbox and connect them to the terminal block as shown in
Fig 2. Ensure that functional earth/screen continuity is maintained.
Installation Guide
Model Number
Product Name
MCP1A-R470SF-A071-01
Conventional Indoor Manual Call Point-Red
MCP1A-Y470SF-A071-01
Conventional Indoor Manual Call Point-Yellow
1
Advertisement
Summary of Contents for Apollo MCP1A-R470SF-A071-01
- Page 1 Fig 2. Ensure that functional earth/screen continuity is maintained. © Apollo Fire Detectors Limited 2010 Apollo Fire Detectors Limited, 36 Brookside Road, Havant, Hants, PO9 1JR, UK Tel +44 (0)23 9249 2412 Fax +44 (0)23 9249 2754 Email: techsales@apollo-fi re.co.uk Website: www.apollo-fi re.co.uk...
- Page 2 Unlock the small front cover by inserting the forked key and pushing it home. Remove key, slide the cover down and remove the deformable element. Connect the terminal block 87mm as shown in Fig. 2, secure the call point to the backbox and refi t the deformable element as required.