Advertisement
Quick Links
Advertisement
Summary of Contents for Jackel JP250V
- Page 1 / JP233V...
-
Page 2: General Information
GENERAL INFORMATION To ensure safe and reliable operation, please carefully read this service and installation manual in its entirety before installing and / or using this product. Reasonable care and safe methods in according with sound plumbing practices should be strictly adhered to. Before installation, refer to and understand all relevant local plumbing and electrical codes. DO NOT THROW AWAY THIS MANUAL. -
Page 3: Installation
NOTE: MAXIMUM LIFT MODEL: JP233V is 22’ MODEL: JP250V is 25’ 1. Remove Old Pump. Disconnect pump from power source before handling. 2. Separate the discharge pipe at either the check valve or at the union. If neither a check valve nor a union is part of the existing discharge pipe, cut the pipe with a hacksaw and remove the pump. - Page 4 TROUBLE-SHOOTING (CONTINUED) PUMP DOES NOT RUN OR HUMS. 1. Line circuit breaker may be off, tripped or loose. Have certified electrician check fuse or breaker. 2. Water level in pit may be too low to activate switch. Add more water to pit. 3.
-
Page 5: Maintenance
MAINTENANCE These Submersible pump models have sealed permanently lubricated bearings and require no additional lubrication. The pump should be checked frequently for debris and/or build up which may interfere with pump or float switch operation. The float must be able to move freely through its complete travel without any restrictions. Pour enough water into the sump to activate the pump periodically (at least every 3 months) when not normally in use to verify proper function. - Page 6 The original sales receipt must accompany the returned pump. Jackel shall not be liable under this Warranty for any product that, in our sole judgment, has been subject to negligence, misapplication, improper installation, or improper maintenance. Also, Jackel shall not be liable under this Warranty if the product has been disassembled, modified, abused or tampered with;...