Be sure to read this manual before use so you will know how to install it properly. After you have nished reading these documents, put them away in a safe place for future reference. • The content of this manual and the specifications of the product it describes are subject to change without prior notice.
INSTALLATION PROCEDURE 1. Open the carton and find the square hole at both end of the polyfoam. Take out the corner connector, hanging kit, Alan head screws, wrench, and springs. 2. Lay the longer frame and shorter frame on a neat and soft ground. Place the L-shape corner connector in the groove of both frames and join the two frames together by the corner connector.
Page 4
4. Install the backing bar between the upper frame and bottom frame. Slant the backing bar and put it in the groove of the frame before you adjust it to be vertical 5. Install the hanging kits on the wall with the expansion bolt. Make sure the two hangers are on the same horizontal line.
Page 5
PRJTPFL102 - PRJTPFL112 - PRJTPFL122 Fixed Wall Mount Projector Screen Universal Home/O ce Projector Viewing Display PRJTPFL102 PRJTPFL112 PRJTPFL122 Screen Size 100’’ -inch (Diagonal) 110’’ -inch (Diagonal) 120’’ -inch (Diagonal) White Display 87.0''x48.8''-inches 96.0''x54.0''-inches 104.0''x58.7''-inches Screen (W x H) (W x H)