SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). •...
ASSEMBLY INSTRUCTIONS (continued) Installation Steps 5. Place mounting bracket Turn off the power at fuse or Outlet Box against the outlet box, circuit box. Mounting Bracket insert the mounting bracket 1.The fixture mounting bracket is screw (DD) through the pre-assembled on the light mounting bracket hole, fixture (E).
ASSEMBLY INSTRUCTIONS (continued) ASSEMBLY INSTRUCTIONS (continued) ASSEMBLY INSTRUCTIONS (continued) Sensitivity of Motion Sensor: ● You can adjust the sensitivity of the motion sensor by using the “MOTION SENSITIVITY” selector located at the back of the sensor (See Fig. 3). Note: Range set too high may increase false triggering. ●...
Page 5
ASSEMBLY INSTRUCTIONS (continued) FUNCTION AND OPERATION (continued) ASSEMBLY INSTRUCTIONS (continued) Customization Options Shut-off Delay ● The shut-off delay is the length of time the light will stay at brightness after motion is detected. ● You can set the shut-off delay by rotating the “TIME” knob arrow so it points to the desired time setting (from 5 seconds to 3 minutes).
CARE AND MAINTENANCE Clean the glass and coated metal surfaces with a non-abrasive cleaner. Do not use any cleaners with chemicals, solvents or harsh abrasives, The motion detecting lens is coated with a specially painted finish and requires special care when cleaning. Use only a soft dry cloth to dust or wipe the lens area. TROUBLESHOOTING Troubleshooting ---The light does not come on at all:...