Advertisement
Quick Links
Connecting The USB Cable:
Prior to connecting the USB cable, you must first install the supplied software. When
connecting the USB cable, insert the square end of the c able into the USB port on the
Digital Video Microscope. Next, insert the rectangular end into the USB port on your
computer.
Loading the Software:
Insert software provided into your CD-Rom drive and follow the instructions.
System Requirements:
T-1951, T-1952 & T-1953
Pentium II 433mhz
Microsoft Internet Explorer 5.0
128mb of RAM
Windows 2000
8mb Video (24bit color)
BULB REPLACEMENT
a. Before changing the bulb, make sure that the power switch is off and the power
cord has been disconnected from the main supply.
b. Under your digital video microscope use a slotted screwdriver to remove the
screw on the lamp door. Pull open the lamp door and carefully remove the old
light bulb from the socket. Put in new bulb and push into socket.
c. Clean the bulb surface with alcohol and lens paper.
d. Close lamp door and replace screw.
e. Replacement bulbs may be purchased on Ken-A-Vision web site under
accessories at www.ken-a-vision.com
CARE AND MAINTENANCE
Your Digital Video Microscope is a fine precision instrument and should be treated
with care. When not in use it should be protected from dust by the plastic cover
provided. Lenses and eyepieces should be cleaned periodically with optical lens tissue
which is soft and lint free. Painted surfaces can be cleaned with a moistened cloth.
When using a 100xR objective oil immersion lens, be sure not to leave any oil on
the lens after use. Dip a cotton swab or lens paper with a small amount of denatured
alcohol, and clean the lens surface carefully. Do not use aggressive solvents to clean
lens.
Ken-A-Vision has quality technicians on staff to repair or service your Digital Video
Microscopes. Contact us at 1.816.353.4787 for more details.
WARRANTY: ONE YEAR (CAMERA) AND TEN YEAR (MICROSCOPE) WARRANTY AGAINST
DEFECTIVE PARTS AND WORKMANSHIP .
5615 Raytown Road, Kansas City, MO 64133 U.S.A Tel. 816-353-4787 Fax. 816-358-5072
Email: info@ken-a-vision.com www.ken-a-vision.com
T-1954
256mb RAM
Windows XP
8mb Video
USB 2.0
kav.instrman.digmicro.pc.v2
INS-SC7DVM
Digital Video Micros
Digital Video Micros
Instruction Manual
c
c
T-1951
T-1952
T-1953
T-1954
op
e
op
e
Advertisement
Summary of Contents for Touchboards ken-a-vision T-1951
- Page 1 Connecting The USB Cable: Prior to connecting the USB cable, you must first install the supplied software. When connecting the USB cable, insert the square end of the c able into the USB port on the Digital Video Microscope. Next, insert the rectangular end into the USB port on your computer.
- Page 2 COMPREHENSIVE SCOPE OPERATION Built-In Illuminator APPLICATION Turn off the power switch before connecting the power cord located at the rear of The Digital Video Microscope is a microscope with our high quality built-in camera. the Digital Video Microscope. An in-base illuminator is built into the base of the Use the T-1951 to view microscopic images on your TV monitor.