Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-1393
USB-C HUB
This instruction sheet is for the Gamber-Johnson USB-C Hub only. For instructions on
features, set-up, and operation of any computer or connected device, please refer to the
manual provided with those products.
This USB-C Hub is designed to be used with a variety of systems. Installation instructions for
other Gamber-Johnson products are provided with each individual product.
This instruction sheet is for the following products:
Item No. 7160-1393-00 Bare Wire Power
Item No. 7160-1393-01 AC Power Adapter
Item No. 7160-1393-02 Bare Wire Power + USB-A Data Cable
The USB-C Hub is designed to handle a 10-40Vdc input. Gamber-Johnson recommends
using the bare wire cable included with the -00 and -02 models. The AC Power Adapter is
included with the -01 model. The standard use voltage is 12Vdc and a minimum 5A.
Gamber-Johnson offers the following Power Adapters to power the hub if needed in other
enviroments. These Power Adapters can be ordered from Gamber-Johnson separately.
7300-0461
- Auto
7300-0462
- Auto
7300-0464
- Isolated (12-32Vdc input)
7300-0465
- Isolated (20-60Vdc input)
7300-0417
- Isolated (72-110Vdc input)
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868.
(11-16Vdc input)
Bare Wire
(11-16Vdc input)
Cigarette Adapter
Bare Wire
Bare Wire
Bare Wire
Revision
Rev. A
Printing Spec: PS-001
Form
INST-994
1 / 7
Advertisement
Summary of Contents for Gamber Johnson 7160-1393 Series
- Page 1 INSTALLATION INSTRUCTIONS Product Revision Form INST-994 Rev. A 7160-1393 USB-C HUB Printing Spec: PS-001 This instruction sheet is for the Gamber-Johnson USB-C Hub only. For instructions on features, set-up, and operation of any computer or connected device, please refer to the manual provided with those products.
-
Page 2: Pre-Installation Recommendations
PRE-INSTALLATION RECOMMENDATIONS Gamber-Johnson (GJ) recommends the positioning of all mounts and equipment in the vehicle prior to the actual install to verify mounting locations are safe and practical. Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and software issues are resolved prior to installation. -
Page 3: Feature Identification
FEATURE IDENTIFICATION Cable Tie Locations Provides a location to secure each cable. See page 4. Port Identification Ports, see page 4. Mounting Holes Optional holes to allow mounting with bolts (Not included). Multiple holes patterns including VESA 75mm. Contact-Friendly Edges Part Number Label Provides information on the product. -
Page 4: Port Identification
PORT IDENTIFICATION USB3.0 Type C Power Input (Fast Charging) 1.5A 10-40Vdc Data Input 5A minimum Ethernet USB3.0 USB3.0 HDMI RJ45 900 mA (Fast Charging) 1.5 A PROPER CABLE MANAGEMENT 1. REQUIRED - Use zip ties to secure each cable to the specific strain relief feature on the hub plastic. 2. - Page 5 INSTALLING THE USB HUB INSTALLATION - Power It is recommended to have at least 5A avaialble to power the hub. The input is 10-40Vdc. It is recommended to wire the hub to ignition or a timer to prevent the battery from draining. LED lights will turn on next to the ethernet port and USB stack when the hub recieves power.
-
Page 6: Specifications
TOUCH SCREEN DETIALS SPECIFICATIONS Power Input Range 10-40Vdc Voltage Rating 12Vdc Current Rating Dimensions 4.40" (111.8mm) W x 5.66" (143.9mm) H x 1.05" (26.7mm) D Weight 0.25 lbs (0.11 kg) Operating Temperature -20 C to 70 C (-4 F to 158 F) Storage Temperature -40 C to 85 C (-40 F to 185 F) Mounting... - Page 7 REGULATORY CERTIFICATION INFORMATION Regulatory Model #: 7160-1393 GJ Model #s & Description: 7160-1393-00 USB-C Hub, Bare Wire 7160-1393-01 USB-C Hub, AC Power Adapter 7160-1393-02 USB-C Hub, Bare Wire + USB-A Data Cable Certifications: • EN 55032: 2012 / AC: 2013, Class B •...