Advertisement
Quick Links
Giant/Economy
Sand & Water Tables
Assembling your sand & water table is quite easy. Just follow the
written instructions and accompanying illustrations—you'll be done in
no time! To assemble your table, you will need a wrench and a Phillips
screwdriver. All other hardware is included.
What's Included
• Sand & water tub
• 8 bolts
• 2 side frames (with adjustable legs)
Assembly Instructions
Use the bolts to attach the side frames to the braces. Place a
1
washer on each bolt, between the frame and the brace. Be sure
to insert the bolts so that their heads are on the outside of the
frames. Attach the cap nuts to the bolts. Tighten with the wrench
and screwdriver.
©2009 Lakeshore
(800) 428-4414
www.lakeshorelearning.com
• 2 braces
• 8 nylock nuts
• 8 washers
(continued on back)
Printed in China and U.S.A.
LA308/LA309
Ages 3+
Advertisement
Summary of Contents for Lakeshore Giant Sand & Water Table
- Page 1 Be sure to insert the bolts so that their heads are on the outside of the frames. Attach the cap nuts to the bolts. Tighten with the wrench and screwdriver. (continued on back) ©2009 Lakeshore LA308/LA309 (800) 428-4414 Ages 3+ www.lakeshorelearning.com...
- Page 2 Drop the sand & water tub into the frame. Your new sand & water table is ready to use! Enjoy! Adjusting the Table Legs The economy table has legs that can be adjusted to two heights, while the giant table can be adjusted to three different heights.