Advertisement
Quick Links
MAC PRO® SLED ASSEMBLY INSTALLATION INSTRUCTIONS FOR RKIT-MP
1.
Install the MAC PRO® units onto the computer mounting brackets with the clamps provided, using a flat
horizontal work surface such as a desk or workbench. An illustration of assembling the MAC PRO® into
its bracket while resting on a horizontal surface is shown. (See Figure 1.)
Make sure the thumbscrews are tight and the MAC PRO is secure. (See Figure 2.)
3
09-10013-00
REV. A
(Part Number UPGMP-SLD)
Figure 1
Figure 2
2/13/2014
1
Advertisement
Summary of Contents for Magma MAC PRO SLED
- Page 1 MAC PRO® SLED ASSEMBLY INSTALLATION INSTRUCTIONS FOR RKIT-MP (Part Number UPGMP-SLD) Install the MAC PRO® units onto the computer mounting brackets with the clamps provided, using a flat horizontal work surface such as a desk or workbench. An illustration of assembling the MAC PRO® into its bracket while resting on a horizontal surface is shown.
- Page 2 (See Figure 4.) Figure 4 Install external cables and tie along the mounting bracket using Velcro straps provided as shown. (See Figure 2.) FOR QUESTIONS CONTACT US AT +1 (858) 530-2511 OR SUBMIT A REQUEST AT WWW.MAGMA.COM/SUPPORT 09-10013-00 REV. A 2/13/2014...