LITEMATRIX Line L65AG Series Instructions

Instruction of installation：
—Read the instructions carefully before installation and commissioning.
—The safety of the device can only be guaranteed on condition that to be respected the following instructions, both stages of installation and use therefore it is highly
recommended to keep them.
—When installing, always observe the national installation and accident prevention regulations.
—Installation and commissioning may only be carried out by authorized specialists.
—The device cannot be in any case modified or forced, any modification might jeopardize the safety system making it dangerous. LiteMatrix declines any responsibility
on modified products
ATTENTION: For suspension mounting. Luminaire not suitable for being covered with heavy staffs or thermally insulating materials.
LITEMATRIX(HK) CO LIMITED
Flat A 8/F No.227 Nathan Road Yau Ma Tei Kowloon Hongkong
www.litematrixlighting.com
Instruction
L65AG
FOR INDOOR USE ONLY!
Phone:
Fax:
E-mail:
Table 1-Parameters
L
mm
LAG-565
565
LAG-565-DI
LAG-1125
1125
LAG-1125-DI
LAG-1685
1685
LAG-1685-DI
LAG-2245
2245
LAG-2245-DI
-Lateral air space under EN 60598: The lateral distance between the surface of
the luminaire and any parts of the building must be no less than 50mm.
-Please DO NOT exceed the rated load-bearing of ceilings.
-Recommended mounting and using environment: Ta=25℃.
852 30501787 LiteMatrix reserves the right to make technical and design
changes without prior notice.
852 30506957
sales@litematrix.net 2017.10
Line Pendant
L65AG DI
A H Mass Finish
mm mm kg
2.6
Max. White/
80-100
2000 Black
2.8
5.0
Max. White/
80-100
2000 Black
5.2
7.8
Max. White/
80-100
2000 Black
8.0
10.4
Max. White/
80-100
2000 10.8 Black
Color of
reflector
White/
Silver
White/
Silver
White/
Silver
White/
Silver
1 / 3