Viking DTWN Specification

Standard Features & Accessories
All models include
• Must also purchase interior or exterior
ventilator kit, sold separately (see
Installation Notes & Accessories for
recommended Viking ventilator
products
• 24"D.(tests show 24"D. hoods
perform properly over 27"D. ranges)
• Heat sensor turns the ventilator on full
power when cooking temperatures
reach uncomfortable levels
• Variable speed controls for custom
venting—separate on/off switch allows
you to leave ventilator at
favorite/most-used setting
• 12-hour timer built into ventilator
controls
• Delay feature allows you to set the
ventilator to shut off on its own from
10 – 30 minutes later
• Heavy-duty construction; elegant
design, and styling
o Virtually seamless stainless steel
design with no visible screws
• Easy cleanup
o Dishwasher-safe, stainless steel
mesh filters efficiently remove
grease and heated vapors from the
Model Options
FINISH DETAILS FOR ALL MODELS
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite Gray
(GG), Stone Gray (SG), Taupe (TP), Biscuit
(BT), Cotton White (CW), Oyster Gray
(OG), Golden Mist (GM), Lemonade (LE),
Sage (SA), Mint Julep (MJ), Sea Glass (SE),
Iridescent Blue (IB), Viking Blue (VB),
Pumpkin (PM), Racing Red (RR), Apple
Red (AR), Burgundy (BU), Plum (PL),
Chocolate (CH), and Cobalt Blue (CB).
• Finish designates exterior of canopy
• Stainless Steel (SS) canopy interior
*Shown throughout with adjustable duct cover, included.
**Shown throughout with duct cover, sold separately.
See Installation Notes & Accessories for duct cover model numbers and ship weights.
ORDERING INSTRUCTIONS
First specify model number, followed by color code (DTWS3049SS). Specify decorative rail code at end (DTWS3049SSCR).
P L A N N I N G A N D D E S I G N G U I D E
V I K I N G R A N G E . C O M
air, and are easily removed for quick
cleaning (frame and mesh are
stainless steel for durability and long
life)
See Dimensions & Specifications
•
table for number of filters (and
spacers) per model
o Design of low-profile filter system
means less interior hood space to
be cleaned
o Canopy interior is completely lined
in stainless steel for increased
rigidity, seamless appearance, and
easy cleaning
• 50-watt halogen lights with dimmer
control
o Power switch and dimmer control
are separate, allowing you to leave
dimmer at favorite position
o See Dimensions & Specifications
table for number of lights per model
DTWS models include
• 9"H.
• Adjustable duct cover (for 8 – 9'
ceilings) shipped standard (see
Dimensions & Specifications table)
o Finish matches canopy exterior
DTWS Slim Traditional
Wall Hood*
EXTRA FINISH DETAILS FOR DTWS
MODELS ONLY
• Accessory Rail—along front of canopy
(must be ordered and factory installed)
• Stainless Steel/Chrome (CR)—Stainless
steel rail with chrome supports/brackets
and hooks (included)
• Brass Trim Option (BR)—nameplate, rail,
supports/brackets, and hooks (included).
Brass components have a durable
protective coating for maintenance-free
normal use.
• 1 - 8 8 8 - V I K I N G 1
VENTILATION
Designer Built-In Wall Hoods
DTWN models include
• 18"H.
• Duct covers must be ordered
separately (see Installation Notes &
Accessories)
Model numbers
SLIM TRADITIONAL WALL HOODS
• DTWS3049—30"W.
• DTWS3649—36"W.
• DTWS4249—42"W.
• DTWS4849—48"W.
TALL TRADITIONAL LEGDELESS WALL
HOODS
• DTWN3048—30"W.
• DTWN3648—36"W.
• DTWN4248—42"W.
• DTWN4848—48"W.
Slim Traditional Wall Hoods should not
be installed over Professional cooking
products with the gas Char-Grill feature.
A 1,200 or 1,500 CFM (if applicable)
ventilator kit should be used when
installed over ranges/rangetops with gas
grill.
DTWN Tall Traditional
Ledgeless Wall Hood**
© 2 0 0 7 V R C — INFORMATION SUBJECT TO CHANGE
R E L E A S E D 1 2 / 1 / 0 7