Related Manuals for Kaye 5C Series
Summary of Contents for Kaye 5C Series
- Page 1 IMPORTANT INFORMATION DO NOT DISCARD W5C Kaye Posture Control Walker W5C Walker 2.20.2006 Pg 1 “5C” Series These are the user instructions for the Kaye Posture Control Walkers . All persons who set- up, adjust, or use the walker should first read these...
- Page 2 This should match the height from the floor to the middle of the user’s buttocks. WALKER USE The Kaye Posture Control Walker is designed as MODEL HEIGHT RANGE MAX. WEIGHT a reverse or posterior walker, where the user faces away...
-
Page 3: Seat Installation
frame. Install the other rear leg into the rear, right side of the frame. 3. Make sure snap buttons are fully extended. WALKER HEIGHT ADJUSTMENT Adjust the height of the walker so that the top, rear bar is aligned with the middle of the user's buttocks. To do this, press the snap buttons on each leg and slide the leg up or down as needed. -
Page 4: Adjusting Wheel Alignment
To prevent the wheels from swiveling, first point the wheel straight ahead as shown. Then rotate each latch around and up until it is seated fully into the slot located in the plate above and to the inside of the wheel, as shown. -
Page 5: Maintenance And Care
If a product needs service or spare parts, CAUTIONS contact Kaye Products, Inc. or the dealer from whom 1. Not tested for the elderly. you purchased the item. 2. Each time you unfold or adjust the walker, ensure...