Advertisement
Quick Links
Jebao Pond
Pump JGP series
Please read these Instructions
completely
before using one of the jebao pond pumps in
below
table.
Model
Rated
voltage
rated
current
Motor
Flow
Max.
Total
Max.
input
head
operation
depth
JGP15000
120V,60Hz
2. 55A
EM-15000
15000Llh
8.5m
2m
JGP20000
120V,60Hz
3. 55A
EM-20000
20000Llh
7.5m
2m
JGP25000
120V,60Hz
3. SA
EM-25000
25000Llh
S.5m
2m
JGP30000
120V,60Hz
4.
5A
EM-30000
30000Llh
9.0m
2m
These pumps are used as submersible
and non-submersible
pumps
provided with overload-protected
devices in garden ponds, fountains, terraced fountains, indoors
fountains
to
circulate and
oxygenate
clear water. You can use the suction cups or four
screws to fix
it.
It is fixed to any appropriate
bases.
Make sure that the appliance is securely installed before operating
it.
These
pumps
are not for use in
swimming pools!
CAUTION:
These Pumps should be
installed according to your
local
electrical
installation code. Please
contact an electrician.
For all
technical
data, please
refer to
the
content stated on th e
rating
label
of
the
pump.
Safety instructions
•
Read and observe all the instructions supplied
with
the appliance
and
on the appliance.
•
Make sure that you outlet voltage corresponds
to the
stated on
the
rating
label of the
pumps.
•
Make sure the appliance is securely
installed before
operating
it.
•
The electrical connection
should be located
in a water-proof
area
and
should be
at least 2
meters
(6 feet) away from the edge of the pond (see
fig.1).
•
Keep the electrical connections
dry! Ensure
that the electrical cord
loops below
the
electrical
outlet to form a "Drip Loop". This will
prevent water from running down
the
cord
into the electrical
outlet.
•
Always unplug the appliance when not
in
use,
before putting on
or taking
off
parts, before
cleaning the pumps and before doing any work
for the fountain or
pond.
•
The pump
must
not be used when people are
working
in
water.
Please
disconnect the
pump
first.
•
Do not operate any appliance with a
damaged
cord
or plug,
or
in abnormal state.
The supply cord
of the appliance cannot be
replaced.
If
the
cord is damaged the appliance
should be
scrapped.
•
For safety reasons, any repair work should be
done only by
the
manufacturer
of the
products
or
the authorized service facility or discard
it.
•
Never hang or
transport
the pump by means
of pulling the power
cord!
•
Close
supervision
is
necessary when the appliance
is
used
by or near
children.
www.allpondpumps.com
2015
1
Advertisement
